Audited Supplier
Features
- Field-termination connector with no epoxy or polishing required
- No matching gel enables low reflection and high reliability
- Splicing point is inside of the connector. No additional splicing work required
- Easily assembled with one-touch, push-pull system
- Used for φ3.0mm,φ2.0mm cable and 3x2mm drop cable etc
- The fusion splice position can be protected by the heat shrinkable tube inside, not easy broken100% qualified, prolong use life, reduce the Maintenance cost
- The operator can confirm if the splicing is successful by the monitor of fusion splicing machine, to make it have more stability
Technical Parameters:
Item | Technical Parameters |
Suitable Cable OD | 0.9mm, 2.0mm, 3.0mm |
Optical fiber diameter | 125μm |
Tight buffer diameter (μm) | 900μm |
Fiber mode | Single & multi mode |
Operation time | About 120s ( no fiber cut ) |
Insert loss | ≤ 0.3dB(1310nm & 1550nm) |
Return loss | > 55dB |
Fastening strength of naked fiber | >5 N |
Fastening strength of naked fiber holder | >10 N |
Tensile strength | >50 N |
Using temperature | -40~+75°C |
On-line tensile strength (20 N) | IL ≤ 0.2dB |
Mechanical durability (500 times) | IL ≤ 0.2dB |
Drop-off test (drop-off height 4m, once per direction, totally 3 times) | IL ≤ 0.2dB |
Application:
1. Fiber optic equipment, Fiber optic communication system
2. FTTH optic fiber terminal connection
3. Optical access network
4. Fiber optic data transmission, CATV
5. Central office connector replacement
6. Data center installation
