Audited Supplier
What is low alloy steel?
Low-alloy steel is a type of metal that is made by mixing steel with another metal that has good qualities. About 1% to 5% of the alloying elements are in low-alloy steel. Therefore, it has specific chemical compositions that provide superior mechanical qualities meant to avoid corrosion.
What is low alloy steel used for?
Low-alloy steels are commonly used to make pipes, car and jet engine bodies, rail lines, and structural engineering plates for both onshore and offshore use. Because it is resistant to corrosion, high-strength low-alloy steel is used in these places. Less than 10% of the alloying elements are usually found in low alloy steels (C, Mn, Cr, Ni, Mo, V and Si combined). When making steel, it is very important to do elemental analysis quickly and accurately. It is not only needed to meet quality standards, but it also helps the steel producer save money in a market that is becoming more competitive.
Amardeep Steel offers the Low Alloy Steel (LAS) package for the sequential and simultaneous XRF spectrometers Zetium and Axios FAST to address the needs of the steel industry for fast and flexible analysis. This solution is based on more than 90 certified reference materials (CRMs) that cover up to 21 different elements and 4 monitor samples to correct for drift and sample preparation.
High-strength, low-alloy (HSLA) steel is a type of low-alloy steel that is different from other low-alloy grades because it was made to meet specific mechanical needs rather than a certain chemical composition. Some things that use HSLA are warships, structural steel, and other strong things.
ASTM A514, A517, and T1 steels are quenched and tempered to make them strong, tough at low temperatures, and pliable. They are used to make things like heavy equipment and boilers and pressure vessels.
Some alloys are used in weathering steels like ASTM A242, A588, and A709 Grade 50W to make a protective layer that doesn't rust. This layer also gives the finished steel a weathered look. It was first sold as COR-TEN®. Weathered steel is often used in art, on bridges, and on the outside of buildings to get a certain look.
| Product Name | Carbon Steel Plate |
| Length | 1m-12m or as required |
| Width | 1m-3m or as required |
| Thickness | 8mm-150mm or as required |
| Standard | AISI,ASTM,DIN,JIS,GB,JIS,SUS,EN,etc. |
| Technique | Hot rolled |
| Surface Treatment | Clean, blasting and painting according to customer requirement |
| Thickness tolerance | ±0.1mm |
| Material | Q345B,Q345C,Q345D,Q345E,Q390,Q390B,Q390C,Q390D,Q390E,Q420,Q420B,Q420C,Q420DQ420E,Q460,Q460D,Q500C,Q500D,Q500E,Q550C, Q550D,Q550E,Q620C,Q620D,Q620E,Q690A,Q690B,Q690C,Q690D,Q690E,Q690D,Q690C,Q890C,Q890D 16Mo3,16MnL,16MnR ,16Mng,16MnDR HG785D,S690QL,50MN |
| Application | It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. |
| MOQ | 1tons.We also can accept sample order. |
| Shipment time | Within 15-30 workdays after receiving deposit or L/C |
| Export packing | Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required |
| Capacity | 50000tons/year |
1.Who are we?
We are a GB/T 19001-2016/ISO 9001:2015 certified professional total solution provider and supplier of steel products.
2. What can we supply?
We provide one-stop steel sales and professional steel supply chain management. Our main products include steel coil, steel plate, steel profile, steel pipe, steel structure and wind power tower barrel.
3.what do we specialize in?
We specialize in providing medium and heavy plates including shipbuilding board, High strength steel plate, weathering resistant steel, corrosion resistant steel plate, abrasion resistant steel plate, boiler and pressure vessel steel plate, high-rise building steel structure and wind power tower barrel.
4. Who are our cooperative factories?
As a steel company that has been in this line of business for many years, we have established profound and firm relationships with major large China's steel manufacturers including Shandong Steel, AN STEEL, Baogang Steel, Rizhao Steel and Nanjing Steel and gained great reputations from domestic and overseas clients.
5. what is our payment term?
30% T/T advance and 70% T/T balance before delivery.
6. Can I have a free sample?
Yes, a sample in small size is provided for free of charge, but the client shall bear delivery fee.
7.What is lead time and delivery time?
We will arrange production immediately upon the receipt of advance payment and shop to you after the payment of balance.
