Hot Sale 250kv Portable Nondestructive Testing Equipment

XXG2505L is a directional corrugated ceramic X-ray tube flaw detector:
Maximum output voltage 250KV,
Maximum tube current 5 MA,
Focus size: 2.0*2.0 mm,
Focal length is 600 mm, 5 minutes through 40 mm A3 steel, blackness is not less than 1.5, sensitivity is better than 1.5%, 1:1 work and rest, forced air cooling.
 

Equipment Packing List (standard)
1. X-ray generator
2. One controller
3. Each YR3*2.5 power cable is 10m
4. Control cable YR 3*2.5+6*1, each 25m
5. Fuse 20A five pieces 6*30
6. Each ground cable is 5 meters
7. A copy of product specification
8. The product comes in three packages
9. One certificate of qualification

The specific characteristics of flaw detector as below:

1. The control panel adopts chip components, digital microcomputer control, free of parameter adjustment and maintenance, strong anti-interference ability;
2. The loop is modular structure, air duct type heat dissipation, high reliability of continuous work;
3. Time and Kilovolt adjustment using shuttle knob, adjust quickly, convenient and reliable;
4. Different rate adaptive frequency conversion control stat generator, voltage with a soft start slow shut off;
5. Automatic warm up function, discharge automatic step-down, time automatic step;
6. Generator cooling fan circuit fault detection, to ensure continuous heat dissipation;
7. Equipped with waterproof and dustproof warning light socket, external LED exposure warning light;
8. Equipped with safety door signal interlocking terminal, can be connected with lead door control, to ensure personnel safety;
9. Time-lapse exposure time can be adjusted freely, the default maximum 5 minutes;
10. Rubber shock absorption and Angle protection around the box, more assured in field work;
11. Can accumulate record exposure time
12. No need to open the cover, specific combination of buttons can set a variety of compatible model parameters.