Audited Supplier
MWY5
Online
18 Month
Customized
Red, Yellow, Customized
1650kg
New
Single Item
320.000kg
Power
DC200V
Lifting Electromagnet
Permanent Neodymium Magnets
1set
Manufacturing Plant, Construction Works
High Efficiency
Steel Scrap
100X100X50cm
ISO9001
KE
Wooden Case
163X128X125
China
Product Description
Lifting Electormagnet
Suitable for cast ingot ,steel ball ,machine chip ,for various kinds of steel scraps ,return scrape ,cropping, baling scraps and etc in foundry factories and for iron powder in coal washery ,during slag disposal process ,it can remove large size of iron at initial step .Outlet box has two chambers, an extra-thick fender and an anti-twist setting .There are the excitation options; rated voltage DC220V; strong excitation; over excitation.
Series MW5 Type | Product Description | |||
Normal Temperature | According to the material's temperature ≤150°C. | |||
High Temperature | According to the material's temperature between 150°C -- 600°C. | |||
Super High Temperature | According to the material's temperature between 600°C -- 700°C. | |||
High Frequency | TD -- 70%. Duty cycle >60%. | |||
Strong Magnet | Strong magnet with attraction force 30% higher than normal type. | |||
Advantages of Hydraulic Excavator Magnet Lift
1 . The rated electrification continuation rate of ordinary electromagnets has been increased from the previous 50% to 60%, which has increased the use efficiency of electromagnets.
2. The high-temperature type electromagnet adopts a unique heat insulation method. The temperature of the sucked object is increased from the previous 600°C to 700°C, which expands the adaptability of the electromagnet.
3. Excitation coils are treated by a special process to improve the electrical and mechanical properties of the coils. The heat-resistance grade of the insulation material is up to Class C, the overall insulation of the suction cups is H-class and the service life is long.
4. optimized by computer design, reasonable structure, light weight, large suction, low energy consumption.
Lifting Electormagnet with crane
Lifting Electormagnet with excavator
MW5 High Temperature
Between 150°C -- 600°C
MW5 High Frequency
TD -- 70%
MW5 Strong Magnet
30% higher than normal
