Audited Supplier
Customized BESTAM-5
Automatic Machine
BESTAM
L3.9W1.25H2.1M
China
Product Description
Mainly used for the automatic production and encapsulation of reagent kits. vibrating disc sorts the bottom shell and cover, then cuts and assembles, sets the test card and desiccant into the aluminum foil bag and seals it through CCD inspection, when embossed , output as required.
Key Features
» Fully automatic intelligent production, good silence and versatility, saving manpower:16-18 people/shift;
» The utilization rate of raw materials is high, the head and tail of slats are intelligently removed that controlled at 3-5 mm;
» High precision feeding module, cutting precision control at ±0.05MM;
» The cutting design is unique and viscose is in good condition, the tool can be replaced quickly and accurately without alignment or adjustment;
» Imported steel vacuum heat treatment grinding tool, could be used more than 600,000 times service life;
» CCD automatic detection, direct rejection of defective products and feedback test results;
» The equipment sensor could auto-detect whether desiccant, dropper and card are installed.
» Modular design, more reliable performance, better maintenance and greater output per unit area;
Capacity | 4000PCS/H | Utilization Rate | ≥90% |
Size | L6.6/6.9*W1.8*H2.1 M | Rated Voltage | 220V/380V/50Hz |
Weight | About 2800KG | Power | About 11KW/16KW(Robot) |
Uploading | Vibrating plate /Robot feeding | Noice | Under 75dB |
Pressure | 0.5-0.7Mpa | Gas consumption | 1100L/min 1300L/min |
