Audited Supplier
| Electrical Characteristics | |
| Total Resistance | 1KΩ~1MΩ |
| Resistance Tolerance | 500Ω<R<1MΩ:±20% R<=500Ω or R>=1MΩ:±30 |
| Resistance Taper | A.B.C |
| Max. Operating Voltage | AC 50V, DC 10V |
| Rated Power | 0.05W |
| Insulation Resistance | Less than 100MΩ at DC 250V |
| Withstand Voltage | 1 minute at AC 300V |
| Residual Resistance | 50Ω Max |
| Gang Error (Dual Unit or Multi-unit) | -40db~Odb±3db |
| Mechanical characteristics | |
| Detent | 1(Center) detent, 11 detents |
| Total Rotational Angle | 300°±10° |
| Push-Pull Strength | Pull: 10Kgf Min; Push: 10Kgf Min at 10sec |
| Rotational Torque | 20-200gf.cm |
| Stopper Strength | 3.0Kgf.cm Min |
| Shaft Wobble | 0.5mm Max |
| Detent Torque | 20 ~ 250gf.cm |
| Bushing nut tighten Strength | 10.0Kgf.cm |
| Durability | |
| Rotational Life | Standard life: 30,000 Cycles Min.; Long life: 100,000 Cycles Min. |
| Cold Test | -20±2°C for 96 hours. △TR< ±15% |
| Dry Heat | 70±2°C for 96 hours. △TR< ±15% |
| Temperature Cycle | 20~+70°C, 5 cycles. △TR< ±15% |
| Soldering Condition | Solder dip: 260±5°C 5 Sec; Manual Soldering: 350°C±10°C 3 sec |
| Switch Characteristics | |
| Rated Power | 3.0A at DC 16V |
| Contact Resistance | Less than 50mΩ |
| Switch Angle | 30°±10° |
| Switch Torque | 50~250gf.cm |
| Switch Life | 25,000 cycles at without load |
1.Flux builded-up prevention is taken through inserting molding around the resistorwith resin.
2.A large variety of products lined up to support various applications.
3.Dual Shaft and miniature design for audio applications.
4.Long Life Type Available.
Q: Where Can we get the datasheets of the products?
A: Each product has the specification, Please contact with our sales if you need
Q: Can we get the samples before placing the order?
A: Yes. we can send you some free samples for your test before your order.
Q: How long is the lead time?
A: Normally we keep stock for most products, the lead time is 5~7 days as soon as the payment is released.
For customized products, it takes longer.
Q: How about the after-sale service?
A:We offer 12 months for every products we sold. If you meet any problems after sales, Pls contact us freely,we'll help solving the problems within 24 hours.
Q: What's the payment terms?
A: Normally we accept TT and Paypal. L/C is also accepted if the order quantity is large. For old customers, we'll guanartee monthly payment after good cooperationship.
Q: How about your quality control?
A: All the products will be 100% checked before the shipment.
Q: Does your company accept small order?
A: Yes, we accept small trial order.
Q: Do you support customization?
A: We support the OEM&ODM service.
