Audited Supplier
This product is specially designed for laser tube cutting equipment. The product itself can be used as an independent rotating spindle, and a chuck in it can firmly clamp workpiece and rotate simultaneously. The quick clamping and loosening actions can be realized by side rotation and air intake. Disconnect the air source before operation. After the product base is fifixed, to clamp and rotate the workpiece, it only needs to equip with a matching motor and connect it with the gear and meanwhile connect the compressed air source.
The chuck can work in full stroke without additional adjustment of four claws. It can clamp all applicable pipe fittings and improve production efficiency. Adopting a fully closed structure, the chuck has better stability and wear resistance. With cross roller bearing, it has longer service life, higher rotary accuracy and repeated positioning accuracy than traditional laser chuck, and greater clamping force than similar products in the market. In the case of low air pressure, a smaller clamping force can be obtained, thereby satisfying the need of processing thin-walled pipe fittings.
The product is widely used in special laser pipe cutters and other pipe processing machine systems.
| Model | Claw stroke (mm) | Maximum clamping force (kn) | Allowable pressure(MPa) | Limit speed (r/m) | Clamping range (mm) | Central height (mm) | Whole unit weight (kg) | Rotating part weight (kg) | Rotational inertia (kg.m2) |
G500D-230 | 220 | 1.5 | 0.3-0.9 | 150 | 8-228 | 315 | 245 | 124 | 4.18 |
1. More than 20 years industry experience.
2. Professional R&D team.
3. Rapid update.
4. High precision products.
5. Customized products.
