Audited Supplier
S1120P-16-150W
Full-Duplex & Half-Duplex
Ethernet Switch
10/100/1000Mbps
16
8K
IEEE 802.3af/at
135W
OEM
Carton Box
440x178x44mm
China
8517623200
Product Description
16-port Gigabit Ethernet PoE Switch with 2 GE & 2 SFP fiber port
Model: S1120P-16-150W- 16* 10/100/1000 Base-T Ethernet ports (Data/Power)
- 2 * 10/100/1000 Base-T Ethernet ports (Data),
- 2 * 100/1000 Base-X SFP optical ports
- 8K MAC address and MAC address automatic learning
- IEEE 802.3x full-duplex flow control and half-duplex backpressure flow control
- 40 Gbps non-blocking wire-speed forwarding backplane bandwidth
- The maximum output power of the PoE port is 30 W.
- The maximum output power of the switch PoE port is 135W.
- 4 Mb large buffer design
- Standard 19inch 1U rack-mount
| Model | S1120P-16-150W |
| Dimensions | 440mm*178mm*44mm |
| Mounting | Rack mounting : support Desktop mounting: support Wall mounting: support |
| Enclosure material | Metal |
| Interfaces | (18)1GE RJ45 ports (2)1GE SFP ports |
| PoE interface | (16) PoE (Pins 1, 2+; 3, 6-) |
| LED Indicator | Power Link/Act PoE MAX |
| Fan | N/A |
| Switching capacity | 40Gbps |
| Forwarding rate | 29.8Mpps |
| Power method | 100-240V AC,50 / 60Hz |
| Power consumption | 150W |
| Total available PoE | 135W |
| Max. PoE wattage per port by PSE | 30W |
| Lightning protection | Port: 6 KV Power:6 KV |
| Button | Funtion mode Button |
| Operating temperature | 0°C - 45ºC |
| Storage temperature | -40°C - 70°C |
| Operating humidity | 10% - 90%,non-condensing |
| Storage humidity | 5% - 90%,non-condensing |
| Certifications | FCC, CE, RoHS |
| Funtions | One-key to change network mode: 1.Standard: All ports can communicate with each other. It can be used as a common non-management PoE switch. 2.Priority: Ports 1 to 8 are high-priority ports, which greatly reduce packet loss and congestion when the network is congested. 3.Extend: The maximum transmission distance of the 9-16 ports of the switch can reach 250 meters, and all ports can communicate with each other. 4.VLAN: Ports 1 to 16 cannot communicate with each other, but can communicate with ports 17, 18, SFP1 (19), and SFP2 (20), which can be used to isolate broadcast storms and DHCP conflicts. |
