Audited Supplier
BWD-01
55295-98-2
Yes
Transparent
Liquid
Decoloring Agent
Pollution of Chemicals
55295-98-2
50%
Industrial Grade
Water Treatment(Color Removal for Wastewater)
Bluwat
30kg Pail, 250kg Plastic Drum, 1250kg IBC
SGS
Jiangsu
38099100
Product Description
BWD-01 water decoloring polymer is mainly used for paper wastewater color removal.
This product is a quaternary cationic polymer which is specialized product to treat effluent for color removal, flocculating and COD decreasing for high colority paper wastewater and other wastewater.
Specificationa:
1, Appearance: Light-color, sticky liquid
2, Viscosity: 50 - 250mPa. S (20º C)
3, Solid content: >50%
4, pH 30% solution: 3 - 5
5, Specific gravity: 1.2 - 1.3 (25º C)
Application methods:
1, Dilutes with 10 - 40 times water and then dosed into the waste water Directly, after being mixed for several minutes, it can be precipitated or Air-floated to become clear water
2, pH index of the waste water should be adjusted to 7 - 10 for better Result
3 If colority and COD are relatively high, it can be used with the help of Polyaluminum chloride to reduce treatment cost, whether polyaluminum Chloride is used before or afterwards depends on the flocculation test And the treatment process
Package and Storage:
1, It is harmless, non dangerous material
2, It can be stored at room temperature, can not be placed in the Sun
3, 25kg pails, 250kg plastic drums and 1250kg IBC tank.
This product is a quaternary cationic polymer which is specialized product to treat effluent for color removal, flocculating and COD decreasing for high colority paper wastewater and other wastewater.
Specificationa:
1, Appearance: Light-color, sticky liquid
2, Viscosity: 50 - 250mPa. S (20º C)
3, Solid content: >50%
4, pH 30% solution: 3 - 5
5, Specific gravity: 1.2 - 1.3 (25º C)
Application methods:
1, Dilutes with 10 - 40 times water and then dosed into the waste water Directly, after being mixed for several minutes, it can be precipitated or Air-floated to become clear water
2, pH index of the waste water should be adjusted to 7 - 10 for better Result
3 If colority and COD are relatively high, it can be used with the help of Polyaluminum chloride to reduce treatment cost, whether polyaluminum Chloride is used before or afterwards depends on the flocculation test And the treatment process
Package and Storage:
1, It is harmless, non dangerous material
2, It can be stored at room temperature, can not be placed in the Sun
3, 25kg pails, 250kg plastic drums and 1250kg IBC tank.
