Audited Supplier
HQ500
Horizontal Lathe
Metal, Wood and Other Materials
Horizontal Guide Rail
Single
Electric
Artificial
Manual
Table
High Precision
GS, CE, RoHS
New
1 Month
OEM or Neutral
in Wooden Case
500x420mm
China
Product Description
- SPECIFICATION
| Modle | HQ500 | HQ800 |
| Distance between centers | 500 mm | 800 mm |
| Swing over bed | 420 mm | |
| Max.longitudinal travel | 440 mm | 740 mm |
| Max.cross travel | 200 mm | |
| Spindle taper | M.T.4 | |
| Travel of tailatock barrel | 70mm | |
| Taper of tailstock barrel | M.T.3 | |
| Spindle hole diameter | Ø28mm | |
| Spindle speed | 160-1360r.p.m. (7steps) | |
| Longitudinal leadscrew pitch | 6T.P.I. or 4mm | |
| Thread can be cutted | 4-120T.P.I./0.2-6mm | |
| Range of automatic feeding (Longitudinal and cross) | 0.002-0.014inch/0.05-0.35mm | |
- & MILLING
| Spindle taper | M.T.3 |
| Spindle travel | 110mm |
| Max. distance between spindle center to column | 285mm |
| Max. distance between nose and table | 306mm |
| Spindle speed | 120-3000r.p.m. (16steps) |
| Table size | 475mm×160mm |
| Drilling capacity | 22mm |
| End milling capacity | 28mm |
| Face milling capacity | 80mm |
| Motor power | 0.55KW | |
| Voltage/Frequency | As customer's requirement | |
| Net weight | 245kg | 280kg |
| Gross weight | 275kg | 325kg |
| Overall dimension (HQ500) | 1460mm×580mm×965mm | |
| Packing size (HQ500) | 1430mm×580mm×1100mm | |
| Overall dimension (HQ800) | 1760mm×580mm×965mm | |
| Packing size (HQ800) | 1130mm×580mm×1100mm | |
- APPLICATION
- CONSTRUCTION
4. ELECTRICAL SYSTEM
4.1 COMPOSITION
The system consists of alternating current contactor (-K), red emergency button (-S1), green (-S2), pilot (-HL), microswitch (-S3,-S4,-S5), shift switch, etc. the system has the protection of lose-voltage, and cutting off the current when cover is opened.
4.2 OPERATION
According to the manual, after finish all the preparations, close all the protection instrument, let the red button in original condition. Push the green button, now pilot light which show that alternating contactor has put through the main circuit and the machine enter into working condition. Push the red emergency button, the alternating contactor break down. Now whether the spindle motor or drilling-milling motors are all cut off. When working, if the protection instrument doors are opened the motor also are cut off.
4.3CAUTION
(1)A FUSE AS THE FOLLOWING CHART APECIFICATIONS MUST BE CONNECTED BETWEEN CURRENT AND THE MACHINE.
(2)THE GROUND TREMINAL OF THE MACHINE MUST BE GROUNDING PERFECTLY.
(3)BEFORE CUTTING OF CURRENT OF THE MACHINE, DON'T OPEN ELECTRIC PROTECTIONS, IF SOME WRONG WITH ELECTRIC SYSTEM, PLEASE ASK FOR A REPAIRMAN TO HELP YOU.
