Hybrid Electric Vehicle Driving System Training Bench Automotive Vocational Educational Equipment

Product Introduction:

The equipment is based on the Toyota Prius 1.5L petrol-electric hybrid engine, and the engine can be started, accelerated, decelerated and other working conditions of the practice

operation truly shows the composition of the petrol-electric hybrid engine structure and working process. It is suitable for middle and higher vocational and technical colleges, general education colleges, and training institutions to the teaching needs of gasoline-electric hybrid engine and maintenance training.


Main Configuration:

Engine assembly, transmission assembly, power battery, inverter, the original car engine, transmission, computer, combination instrument, engine starting, hybrid computer running all the relevant original car accessories, fault setting and eliminate system, the original car circuit principle diagram and testing of the terminal, the large capacity battery, stainless steel tank, engine speed, console, movable bench, the bench Power switch, diagnostic seat, heat dissipation system, digital display meter, fuel pressure gauge, vacuum gauge, universal castor with lock, etc.


Product Features:

1, the training station measurement panel is painted with color printing circuit diagram, using 8mm thickness of high strength acrylic sheet printing, with large temperature resistance, wear resistance, moisture-proof, corrosion resistance, not easy to deformation, long service life, bright color, not easy to fade and other characteristics.
2. The operating panel of the training platform is equipped with automobile instrument, fuel pressure gauge and vacuum pressure gauge, which can display the engine speed, fuel pressure, inlet manifold pressure and other parameters in real time. It is equipped with a diagnosis seat, which can be connected to a special or general vehicle decoder to read fault codes, clear fault codes, read data streams and other self-diagnosis functions for the engine, transmission and hybrid electric control system. Equipped with throttle control device, can facilitate the acceleration and deceleration of the engine.
3. Detection terminals are installed on the panel of the training platform, which can directly detect the electrical signals of each sensor, actuator and control unit pin on the panel, such as resistance, voltage, current and frequency signals.
4, the training platform is made of steel frame structure welded seamlessly, the metal surface is treated with high temperature plastic spraying, the paint is strong, with bright color, scratch resistance, corrosion resistance, long life and other characteristics, the platform with self-locking caster device, flexible movement, safe and reliable, strong and durable.
 

 

Technical parameters: