Audited Supplier
Hydraulic Bullnosing Cranking and Curving Machine for IBR Widespan Roofing Sheet
Bullnosing and centre-cranking of a profiled sheet incorporate lateral rib indentations pressed in at a uniform distance of 25mm. Standard bullnoses are made with narrow flute uppermost and the bend away from the angular inclination. Reverse bullnoses are made with the bend into the narrow flute. Bullnoses and cranks can be at the end of a sheet or at any position along the length. Bullnoses and centre cranks can be manufactured in radii ranging from 350mm to 800mm for bullnoses which are bent through 0 - 135°. High tensile material can only be bull nosed and cranked to a minimum radius of 450mm.
Hydraulic Bullnosing Cranking and Curving Machine for IBR Widespan Roofing Sheet
Name | Hydraulic Bullnosing Cranking and Curving Machine for IBR Widespan Roofing Sheet |
Suitable Material | Colored or galvanized steel coil, HRB60 or equivalent |
Thickness Range | 0.3-0.8 mm |
Coil Width Range | 914, 1000, 1220 or 1250 mm.According to your actual drawing. |
Electric Power | 380V, 50 Hz, 3 phase or according to your need. |
Dimension | About 2.6*1.6*1.2m(L*W*H), as per the drawing |
Cutting | Automatically stop and cutting when it comes to the set length. |
Length of the Sheet | You can set the length according to your need. It is controlled by PLC length accuracy:±1mm. |
Product for your choose:
