Audited Supplier
!!!100% INTRECHANGABLE WITH ORIGINAL ONES
High pressure and high performance dowel pin type vane pumps are widely used for plastic machinery, casting machinery, metal machinery, pressing machinery, refining machinery, construction machinery, marine-Machinery.
Vickers Series Vane Pump:
V series Pump:
20V, 25V, 35V, 45V, 2520V, 3520V, 3525V, 4520V, 4525V, 4535V
VQ Series pump:
20VQ, 25VQ, 35VQ, 2520VQ, 3520VQ, 3525VQ, 4520VQ, 4525VQ, 4535VQ
20V/VQ - 5, 8, 9, 11, 12, 14gpm
25V/VQ - 12, 14, 17, 19, 21gpm
35V/VQ - 21, 25, 30, 35, 38gpm
45V/VQ - 42, 47, 50, 57, 60gpm
V10 - 1, 2, 3, 4, 5, 6, 7gpm
V20 - 6, 7, 8, 9, 10, 11, 12, 13gpm
VTM42 - 1, 1.5, 2, 4, 5, 6 gpm
1.Intra-vane pumps with hydraulic balancing structure provide more stable performance and longer life since less pressure from vane on stator.
2.Twelve vane system provide low amplitude flow pulsation resulting in low system noise characteristics.
3.Verious displacement and shafts with 4 different outlet opposite position make operation more flexible.
4.The cartridge is independent of the drive shaft, allowing for easy servicing without remove the pump from its mounting.
| 25VQ | 21 | A | (F) | -1 | A | 20 | L |
| Code of series | Displacement codes | Pump port connection | Mounting type | Shaft extension | Outlet port pisition | Design No | Direction of rotation |
| 20VQ | 2,3,4,5,6,7,8,9,10,11,12,14 | A-SAE | No marks:Flange Mounting F:Foot Mounting | 1-Straight shaft with key | (from cover end pump) | 30 | (from shaft end pump) |
| 4-Bolted Flange | 151-Spline shaft | A-Opposition of inlet | L-counterclockwise rotation | ||||
| 25VQ | 10,12,14,15,17,19,21 | 1-Straight shaft with key | B-Counterclockwise 90 from inlet | 20 | No marks:Clockwise rotation | ||
| 35VQ | 21,25,30,32,35,38,45 | 86-Heavy-duty straight shaft with key | C-The same side of inlet | ||||
| 45VQ | 42,45,50,57,60,66,75 | 11-Spline shaft | D-Clockwise 90 from inlet |
| (F3-) | 25V | 17 | A | 8 | (F) | -1 | * | 20 | * |
| Front marks | Code of series | Displacement codes | Pump port connection | Displacement code of rear pump | Mounting type | Shaft extension | Pump position | Designing | Direction of rotation |
| No mark: Nitrile rubber F3: Fluoro rubber | 2520V 2520VQ | 10,12,14,15,17, 19,21 | A-SAE 4-bolted Flange | 2,3,4,5,6,7,8,9,10, 11,12,14 | No marks: Flange mounting F- F-Foot mounting | 1-straight shaft with key 86-heavy-duty straight shaft with key 11-spline shaft | See the following table | 20 | (from shaft end pump) No marks: Clockwise rotation L-counterclockwise rotation |
| 3520V 3520VQ | 21,25,30,32,35, 38,45 | 2,3,4,5,6,7,8,9,10, 11,12,14 | |||||||
| 3525V 3525VQ | 21,25,30,32,35, 38,45 | 10,12,14,15,17, 19,21 | |||||||
| 4525V 4520VQ | 42,45,50,57,60, 66,75 | 2,3,4,5,6,7,8,9,10, 11,12,14 | |||||||
| 4525V 4525VQ | 42,45,50,57,60, 66,75 | 10,12,14,15,17, 19,21 | |||||||
| 4535V 4535VQ | 42,45,50,57,60,6 6,75 | 21,25,30,32,35,38, 45 |
| Shipping Mode: | By air, by sea ,by express (DHL,Fedex, ,etc.) |
| Standard Shipping Time: | By air within 5-6 days. By DHL: within 4-5days.by sea about 1 month |
| Standard Packing: | Carton or wooden case |
| Special Packing: | We can discuss and support you. |
Our technical team all with more than 20 years experience, cheif engineer and workers are from Hytek( high-tech). We have strong research and development ability
The Main products: Denison T6, T7, Vickers V/VQ, V10, V20, Tokimec SQP; Yuken PV2R, PGH4, PGH5 gear pumps, high pressure piston pumps and parts.
Exhibition
1.Q: Is your company a trading company or a manufacturer?
A: Our company is manufacturer, we have our own factory for production.
2.Q:What about the quality control and warranty ?
A: "All products is 100% checked & tested before packing and shipping.
Our products have one year warranty, lifetime technical support.
3.Q:Can you provide samples for checking and testing?
A:yes,we can provide samples for you to check the quality and real performance
4.Q:What's your main application?
A--Construction machinery-Industrial Application-Construction Machinery-Engineer machinery etc
5.Q:What's your main application?
A--MOQ:1pcs.
6.Q:.Can I Mark My Own Brand On The Pump?
A--Yes. We can OEM your brand and code.
7.Q:.How long is your delivery time?
A-2 working days for sample order, 15 working days for bulk orders
8.Q:.If your pump and parts are interchangable with Original
A--Yes. All pumps and parts are 100% interchangable with original
Welcome to Contact us!
