Audited Supplier
Model CH/GP/S MK
Yes
1 Year
ISO 9001:2000, ISO 9001:2008
ASTM
Spray-Paint
Welding
Cast Iron
Milling Machinery, Crusher, Rubber Machining, Quar
Negotiate with Supplier
100% Inspention
≤12h
OEM
Standard Export Package
China
8412299090
Product Description
The hydraulic lubrication system of single-cylinder cone crusher adopts the integrated design of hydraulic oil circuit and lubricating oil circuit, and at the same time, a set of oil return filters will be set up, and a filter screen will be set on the oil return circuit for easy inspection and maintenance. The air cooler is installed independently and equipped with a bypass valve to pass the oil smoothly in winter.
1. Host type applies to this product:
(CH420 / 430 / CH440 / 660 / 870 / 890 / 895 / GP200 / 220 / 300 / 330 / 500 / 550 and Model S)2. Structural features and their properties:
Liquid level controller, the liquid level controller is provided on the oil tank. When the liquid level is at the lower limit position of the liquid level controller, the oil shortage alarm signal is sent out, and the interlocking oil pump cannot be started.
The temperature transmitter detects the real-time oil temperature of the temperature transmitter to the electronic control unit, so as to determine the heating to start or stop heating or stop the host according to the real-time oil temperature.
Electric heater mainly plays a role of heating oil temperature in the system, and is controlled by the real-time detection of the temperature transmitter, so as to achieve that the machinery can work smoothly in the harsh environment of cold winter.
Safety valve, used to limit the operating pressure of the system to protect the components within the system.
Power unit, composed of bell cover, oil pump, motor, and coupling composed of a group of oil transmission power unit, is one of the important units in the whole system.
Filter. In the system, a set of filters are installed in the outlet pipeline of the oil pump and the oil return pipe terminal are equipped with a large flow filter; the filter has a blocking signal device on the filter. When the filter is blocked and the pressure difference between the filter ends increases, the alarm reminds the staff to clean or replace the filter element as soon as possible. The filter at the oil return end is generally self-made filter, which can be cleaned or replaced regularly.
The air cooler mainly plays the role of heat dissipation in the system, and the friction surface of lubricating parts is the main heat conduction source in mechanical operation. The heat dissipation of the cooler is determined by calculating the calorific value of mechanical lubricating parts. The cooler of this system is installed independently, and the structure is equipped with a bypass valve. The function of the bypass valve is that when the oil freezes in the cooler shell in severe cold winter, the oil can flow through the mechanical lubricating parts through the bypass valve, so as to protect the cooling fin of the cooler shell from being damaged due to the blockage of frozen oil.
Hydraulic valve assembly is the core of the hydraulic system, control the action, pressure and direction, etc.
3. Example of technical parameters
| Technical parameters: CH / S440 | |
| Hydraulic station size: | 2200*1100*1200 |
| Main lubrication flow: | 73L/min @50Hz |
| Main lubrication motor power: | 3kW |
| Horizontal axis flow | 0.7L/min @50Hz |
| Horizontal shaft motor power | / |
| Hydraulic flow: | 11L/min @50Hz |
| Hydraulic motor power: | 3kW |
| heater power: | 2X6kW |
| Type of valve group | Full hydraulic (no solenoid valve) |
| Air cooling power: | 4kW |
| control cabinet: | PLC,Touch-screen intelligent cabinet with remote diagnosis |
| Start cabinet: | soft start |
| Positive pressure fan: | 0.75kW electrical interface is reserved. |
| other | The reserved electrical interface shall be indicated |
| Power of main motor: | 220kw/250kw; |
*All brand names, model names, photos or marks are owned by their respective manufacturers. Our company has no affiliation with the original equipment manufacturer. These terms are used for identification purposes only and are not intended to indicate affiliation with or approval by the OEM. All parts are manufactured by, for and warranted by our company and are not manufactured by, purchased from or warranted by the original equipment manufacturer.
