Audited Supplier
HYDX-6
CE, ISO 9001:2000
New
DC Motor
100-150mm
0-2000m
Diamond Bit
Rotary
0-2000m
6CTA8.3-C240
Xingtan
by Sea or by Air
13.5t
China
84306919
Product Description
Product Introduction
The HYDX-6 full hydraulic power head core drilling rig is a lightweight, portable geological exploration core drilling rig specially designed for areas with complex terrain and inconvenient transportation. The main engine includes a diesel power station, hydraulic system, control system, main winch, rope core winch, power head, feed system, and wellhead gripper.
HYDX-6 Full Hydraulic Core Drill Rig It is mainly used in core drill with diamond bit or hard tungsten-carbide tipped bit in the field of engineering geology, shallow oil, natural gas, underground water. It can also be applied in the field of gallery ventilation and water discharge tunnel drilling as well as dam grouting and other engineering drilling.
Technical characteristics
1.The hydraulic pump unit, main valve, and hydraulic motor are all equipped with hight performance power heads, and the lifting adopts a double speed structure of oil cylinder chains and a long feeding range; The way the power head leaves the orifice can be flipped or translated;
2.The spindle rotation adopts a dual motor driven closed circuit;
3.A 2-speed mechanical gearbox supplemented by hydraulic stepless speed regulation;
4.The mast is lifted and lowered by an oil cylinder, which can slide and touch the ground, and can be folded;
5.The hydraulic system adopts load sensitive control;
6.Steel covered belt self-propelled walking;
7.Equipped with high-level worktable and orifice worktable: equipped with hydraulic support legs, upper and lower guide devices:
8.The orifice is equipped with hydraulic grippers, and optional digital instrument monitoring system.
| Project | Parameter | |
| Drill depth | BQ drill pipe | 2000m |
| NQ drill pipe | 1600m | |
| HQ drill pipe | 1300m | |
| PQ drill pipe | 1000m | |
| Power head capability | Speed | 0~134~360r/min |
| 0~430~1100r/min | ||
| MAXIMUM TORQUE | 6400N·m | |
| Vertical shaft through-hole diameter | 121mm | |
| Maximum lifting force | 220kN | |
| Maximum feed force | 110kN | |
| Diesel engine | Rated power | 179kW( 6CTA8.3-C240) |
| Rated speed | 2200r/min | |
| Mast | Total height | 11.2m |
| Adjust angle | 0~90° | |
| Drilling angle | 45~90° | |
| Provide progress | 3800mm | |
| Mast sliding stroke | 1100mm | |
| Main winch | Single rope lifting force | 120kN(Tier 1) |
| Lifting speed | 44m/min | |
| Wire rope diameter | 22mm | |
| Wire rope length | 60m | |
| Auxiliary winch | Single rope lifting force | 15kN(Tier 1) |
| Lifting speed | 100m/min | |
| Wire rope diameter | 6mm | |
| Wire rope length | 2000m | |
| Mud pump | Maximum displacement | 320L/min(2.5MPa/h) |
| Maximum pressure | 8MPa(52L/min/h) | |
| Walking speed | 2km/h | |
| Gradeability | 30° | |
| Ground pressure | 0.14MPa | |
| Weight | 13.5t | |
| External dimensions | Working Size(L×W×H) | 4800×2420×11200mm |
| Transport dimensions(L×W×H) | 6220×2200×2500mm | |
