Audited Supplier
LY1-C40
Type 1+2
Zinc Oxide Arrester
Parallel Arrester
AC/DC System
Small
Low Voltage
Cuboid
ZnO
ROHS, ISO9001, TUV CB CE
Leeyee
1p 2p 3p 4p
4
40 a
220V
Lighting Protection
Surge Protective Device
IP20
275V AC
40ka
20 a
TUV CB
LEEYEE
Zhejiang, China
8536300000
Product Description
Product description This 20ka-40kA ac spd solar protective devices suits for 275V AC 50/60HZ TT Power supply system. Normally installed on the joint of LPZ1 or LPZ2 and LPZ3, designed accordingly to IEC61643-11, GB18802.11 standard. It's standard 35mm din rail installation. There is failure release mounted on the module of surge protective device. When SPD fails in breakdown for over-heat or over-current, the failure release will help electric device separate from the power supply system and give the indication signal. Green means normal, red means fault. Features 1.Module design, easy to install, and change change module no need power off. 2.Inside over-current, over-heat, temperature control open circuit. 3.Fast response time, low residual voltage. 4.Window color indicates working condition, green means normal, red means fault. 5.Max discharge current can endure 40kA(8/20). Type 1+2 surge protection degree. Installation position On the joint of LPZ1 or LPZ2 and LPZ3 usually installed in household distribution boards, computer equipment,information equipment,electronic equipment and in the socket box in front of control equipment or near the control equipment.
Model | LY1-C40 |
Maximum Continuous Operating Voltage Uc | 275V AC |
Nominal Discharge Current (8/20µs) | 20kA |
Maximum Discharge Current(8/20µs) | 40kA |
Voltage Protection Level Up | ≤1.5KV |
Response Time tA | ≤25ns |
Indication Method | Visible window,Green=normal, Red=defect |
Min. sectional area of incoming wire L/N | 4mm2 |
Min. sectional area of incoming ground wire PE | 6mm2 |
Method of Installation | 35mm Din Rail |
Material of shell | PBT |
Remote contact selectable | C+NC means normally closed C+NO means normally open C means normal contact |
Protection level of outer Shell | IP20 |
Working temperature | -25 -+70 |
Test standard | EN 61643-11/GB18802.1 |
IEC test classification | T2/Class II |
Poles | 1P/2P/3P/4P/1P+N-PE/3P+N-PE |
1. Who are we?
We are based in Zhejiang, China, start from 2010,selling surge protectors to overseas. There are total about 101-200 people in our factory.
2.How can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;
3.What can you buy from us?
AC Surge Protective Device,DC Surge Protective Device,Power Distribution Unit,Signal Surge Protective
Device,T1 Surge Protective Device
4. Why should you buy from us not from other suppliers?
Over 12 years factory, professional manufacture in dc surge protector, ac surge protector, signal surge protector,surge protection box,lightning rod, lightning strike counter and related lightning products, CE TUV certificated. OEM and ODM service supply.
5. What services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,CIP,DDP,Express Delivery
Accepted Payment Currency:USD,EUR,HKD,CNY;
Accepted Payment Type:T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese
