Audited Supplier
LGK-100(IGBT)
Plasma
Manual
AC380V
SHELLMAX
Polywood Case
CE CCC ISC9002
China
85152900
Product Description
Plasma cutting inverter IGBT20- 100amps for Perfect all types metal max production Cut 40 mm for mild steel. HF starting, Digital display for AMPS. Saftey input power breaker built in. Euro torch connection as standard Duty Cycle100 Amps @ 80% Generator protection 15 KVA. 3phases 380/415/440 volts.
Demanded gas: Compressed air(No-water, no-oil, dry)
Cutting thickness(mm): 40 Arc-starting: UN-TOUCH Gas flow(m3/min): 0.36 IP23 4 meter PT-31 torch.
Feed-back circuit is controlled by advanced IGBT technology, output current is stable Cutting current can be adjusted continuously from 20Amps to Max current, it can be satisfied with demands of different material and thickness and cutting speed Use non-touched pilot arc-starting, and plasma are can be started within short time. It is very convenient for us to cut metal which surface is not been clean, such as rust and paint, etc.
Demanded gas: Compressed air(No-water, no-oil, dry)
Cutting thickness(mm): 40 Arc-starting: UN-TOUCH Gas flow(m3/min): 0.36 IP23 4 meter PT-31 torch.
Feed-back circuit is controlled by advanced IGBT technology, output current is stable Cutting current can be adjusted continuously from 20Amps to Max current, it can be satisfied with demands of different material and thickness and cutting speed Use non-touched pilot arc-starting, and plasma are can be started within short time. It is very convenient for us to cut metal which surface is not been clean, such as rust and paint, etc.
| Category Name | Subcategory Name | Active | Length | Width | Height | TNT Weight |
| Plasma Machines | Shellmax | 1 | 565 | 283 | 495 | 32 |
