Audited Supplier
PLASMA LG60/80/100/125
Plasma
Manual
AC380V
SHELLMAX
Standard Export Package
CE
China
85152900
Product Description
IGBT INVERTER DC PLASMA CUTTING MACHINE(PLASTIC PANEL AND PILOT STYLE INDUSTRIAL USE MACHINE)
1. IGBT new inverter technology.
2. Three phase power supply. Fuse 20A/25A.
3. Light weight with heavy duty cycle.
4. HF arc start(or without HF or HV)
5.2T/4T control function(auto/standard)
6. (Continuous)pliot arc.
7. Plastic panel new design.
8. Unique gas flow control(two types).
9. Welding cable 3m+300A earth clamp.
Plasma cutting torch 5m+completely accessories.
10. Amps and voltage dual digital display and air pressure show as front panel direct.
11. Over heating and current protection.
12. Professional machines and suitable for industrial use
Feed-back circuit is controlled by advanced IGBT technology, output current is stable Cutting current can be adjusted continuously from 20Amps to Max current, it can be satisfied with demands of different material and thickness and cutting speed Use non-touched pilot arc-starting, and plasma are can be started within short time. It is very convenient for us to cut metal which surface is not been clean, such as rust and paint, etc.
1. IGBT new inverter technology.
2. Three phase power supply. Fuse 20A/25A.
3. Light weight with heavy duty cycle.
4. HF arc start(or without HF or HV)
5.2T/4T control function(auto/standard)
6. (Continuous)pliot arc.
7. Plastic panel new design.
8. Unique gas flow control(two types).
9. Welding cable 3m+300A earth clamp.
Plasma cutting torch 5m+completely accessories.
10. Amps and voltage dual digital display and air pressure show as front panel direct.
11. Over heating and current protection.
12. Professional machines and suitable for industrial use
Feed-back circuit is controlled by advanced IGBT technology, output current is stable Cutting current can be adjusted continuously from 20Amps to Max current, it can be satisfied with demands of different material and thickness and cutting speed Use non-touched pilot arc-starting, and plasma are can be started within short time. It is very convenient for us to cut metal which surface is not been clean, such as rust and paint, etc.
| Model | PLASMA LG60 | PLASMA LG80 | PLASMA LG100 | PLASMA LG125 |
| Input voltage | 3X220V/380/400/415/440 50/60Hz | |||
| Input Power capacity | 8.8KVA | 13KVA | 17KVA | 19KVA |
| No-load voltage | 250V | |||
| current range | 20-60A | 20-80A | 20-100A | 20-125A |
| Duty cycle | 60% | |||
| Air pressure | 0.2-0.5Mpa | |||
| Gas post flow time | 10S | |||
| Max cutting thickness | 25mm | 32mm | 35mm | 42mm |
| Dimesions(mm) | 410x215x310mm | |||
| Weight(Kg) | 30 | 42 | 43 | 45 |
