Audited Supplier
Lr-A001
Online
1 Year
0-100Kg
AC220V
±0.2 ºC
±1ºC
Lonroy
Wooden Package
Inner hole 9.55± 0.025mm
China
9024800000
Product Description
ISO1133-97 ASTM D1238 Melt Flow Index Tester/Mfi Testing Machine Melt Flow Rate (MFR) Melt Volume Flow Rate (MVR)
1.Introduction
Melt flow rate testing instrument can be used for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined.
ISO1133-97 ASTM D1238 Melt Flow Index Tester/Mfi Testing Machine Melt Flow Rate (MFR) Melt Volume Flow Rate (MVR)
2.Standard
GB/T3682-2000, ISO1133-97, ASTM D1238
ISO1133-97 ASTM D1238 Melt Flow Index Tester/Mfi Testing Machine Melt Flow Rate (MFR) Melt Volume Flow Rate (MVR)
3.Specification
| Model | LR-A001-A |
| Barrel parameters | Inner hole 9.55±0.025mm |
| Pistons parameters | Piston head: 9.475±0.015mm |
| Outlet length | 8.000±0.025mm |
| Paramters | Extrusion hole 1=2.095±0.005mm |
| Temperature parameter | With intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parameters can be automatically set, precision up to ± 0.1 degree centigrade |
| Temperature range | Room Temperature~450degree centigrade |
| Temperature fluctuation | ±0.2 ºC |
| Temperature uniformity | ±1ºC |
| Temperature display resolution | 0.1ºC |
| Display resolution | 0.1ºC |
| Maximum comsuption | < 600W |
| Time display resolution | 0.1s |
| Weight parameters are as follows: | |
| Weight accuracy | ±0.5% |
| Basic configuration | A 0.325kg |
| B 1.2kg | |
| C 2.16kg | |
| D 3.8kg | |
| E 5kg | |
| F 10kg | |
| G 12.5kg | |
| H 21.6kg | |
| Position detection | |
| Loop distance from up and down | 30mm |
| Control precision | ± 0.1mm |
| Test flow control | |
| Times of cutting the material | 0~10 times |
| Material cutting interval | 0~999s(set reference Table 2) |
| Control flow reaches the set temperature without volatility | |
| Barrel temperature time | 15 min. |
| Material be installed | 1 min. |
| Material sample temperature recovery time | 4 min. |
| When binder set | 1min |
| Output mode | Micro-automatic print output |
| Cut material methods | The hand automatic cut into one body |
| Test load | Eight sets of weights |
| Power | AC220V±10% 50/60HZ |
