Audited Supplier
AGP-100-1
1 Year
1 Year
Axial Plunger Pump
Single Cylinder
Mechanically Driven Pump
Horizontal
Radial
Electric
Self-Absorbing
Axial Flow
IGLAN or As request
Carton/Pallet
2L, 4L, 6L, 8L, 10L, 12L
China
8413502090
Product Description
Product Overview
AGP100 electric lubrication pump uses DC motor driving force for reciprocating oil absorption and drainage of plunger pump. The power supply uses DC24V power supply. The oil drum provides 2L and 4LPc transparent plastics. It can be divided into two types, i. e. pressure plate type and agitation type. The pressure plate type is pressurized by taper spring and can work in inversion and rotation. AGP100 electric lubrication pump controller has built-in pressure switch, counting, alarm signal output of low oil level sensor. Two plunger pumps with displacement of 2.5cc/min are installed. External installation of safety valve, pressure up to 30 MPa AGP100 electric lubrication pump and the company's progressive distributor (ASV) constitute a progressive lubrication system, but also with the company's single-line distributor (ASL) form a single-line lubrication system for centralized lubrication. The pump is mainly used in wind power, construction machinery and other industries.
Working principle
The eccentric cam on the motor shaft is driven by 24V DC motor to rotate, so that the plunger pump on the compressed cam can move in a reciprocating straight line_and then complete the two processes of oil suction and oil drainage. The plunger pump has a one-way valve, so that the oil discharged can not be reversed.
Single line lubrication system
The single-line centralized lubrication system with ED controller works periodically. The grease provided by the lubrication pump is measured by the single-line distributor. At the same time, the lubrication points are injected for NLG 1, 2. The grease is suitable for wind power, gold treatment, power, port, lifting, woodworking, engineering machinery and other equipment.
Progressive lubrication system
The progressive centralized lubrication system is equipped with LED controller, and the progressive distributor is gradually injected with high-pressure grease according to the progressive type. NLGl-1#, 2#.
Product Display
Technical parameter
Profile Dimension Diagram
Application Case
Packaging & Shipping
After Sales Guarantee
1. Professional online consultant tosolve your question about com-pressor system.
2. Negotiable technican availableto service machinery overseas.
3. Free site design consultant, andenergy saving solution to helpyou save operation cost.
4. Online professional after-serviceuntil solve the problem.
5. Our products have one year warranty period , so if it has quality problems within one year , you can find our warranty.
6. A sufficient number of spare parts are available, make sure the good after service.
FQA
1. Are you a manufacturer?
Yes, we have been in lubrication pumps manufacturing and marketing industry over 10 years.
2. What products you supply?
Our products include grease electric lubrication pumps, oil electric lubrication pumps, oil-air lubrication pumps, single point lubrication pumps, oil-mist lubrication pumps, oil circulation lubrication pumps, manual lubrication pumps, lubrication distributors and lubrication accessories, etc
3. What markets do your pumps export to?
Europe, North & South America, South-East Asia, Africa, Oceanica, Middle East countries. Our overseas agent in Italy, Russia, America and Africa are gradually improving.
4. What information should I let you know if I want to get a quotation?
Please let us know the pump capacity, system, application scenario, operation situation, quantity, etc. As much as your provide, the precision and accurate model selection.
5. Is it available to print our own brand on the pump?
Totally acceptable as international rules.
6.Can you make according to customer require?
Yes, we can make according to your sample or drawing, OEM/ODM service provided.
7.What is your packing?
Netural packing or DAS logo carton packing,or customized box design packing.
8. What is your delivery time?
If we have stock, we can ship within one week. If not, takes about 10-45days depends on order quantity.
9. How can I get the price of your pumps?
You can connect with us through any of the following contact information. Our personalized service person will respond you within 24 hours.
10. What payments can you accept?
T/T, L/C, and Western union,cash.
11. Can you arrange shipment to our warehouse?
Yes, we have long term professional cooperated shipment agent to handle goods to your sea port and can delivery to door as require.
AGP100 electric lubrication pump uses DC motor driving force for reciprocating oil absorption and drainage of plunger pump. The power supply uses DC24V power supply. The oil drum provides 2L and 4LPc transparent plastics. It can be divided into two types, i. e. pressure plate type and agitation type. The pressure plate type is pressurized by taper spring and can work in inversion and rotation. AGP100 electric lubrication pump controller has built-in pressure switch, counting, alarm signal output of low oil level sensor. Two plunger pumps with displacement of 2.5cc/min are installed. External installation of safety valve, pressure up to 30 MPa AGP100 electric lubrication pump and the company's progressive distributor (ASV) constitute a progressive lubrication system, but also with the company's single-line distributor (ASL) form a single-line lubrication system for centralized lubrication. The pump is mainly used in wind power, construction machinery and other industries.
Working principle
The eccentric cam on the motor shaft is driven by 24V DC motor to rotate, so that the plunger pump on the compressed cam can move in a reciprocating straight line_and then complete the two processes of oil suction and oil drainage. The plunger pump has a one-way valve, so that the oil discharged can not be reversed.
Single line lubrication system
The single-line centralized lubrication system with ED controller works periodically. The grease provided by the lubrication pump is measured by the single-line distributor. At the same time, the lubrication points are injected for NLG 1, 2. The grease is suitable for wind power, gold treatment, power, port, lifting, woodworking, engineering machinery and other equipment.
Progressive lubrication system
The progressive centralized lubrication system is equipped with LED controller, and the progressive distributor is gradually injected with high-pressure grease according to the progressive type. NLGl-1#, 2#.
Product Display
Technical parameter
| Max.working pressure | Outlet flow rate | Outlet thread | Applicable temperature | Input voltage | Tank volume |
| 35MPa | 2.5ml/min | G1/4 | -40-70ºC | DC24/AC220V | 2/4/6/8/10L |
Profile Dimension Diagram
Application Case
Packaging & Shipping
After Sales Guarantee
1. Professional online consultant tosolve your question about com-pressor system.
2. Negotiable technican availableto service machinery overseas.
3. Free site design consultant, andenergy saving solution to helpyou save operation cost.
4. Online professional after-serviceuntil solve the problem.
5. Our products have one year warranty period , so if it has quality problems within one year , you can find our warranty.
6. A sufficient number of spare parts are available, make sure the good after service.
FQA
1. Are you a manufacturer?
Yes, we have been in lubrication pumps manufacturing and marketing industry over 10 years.
2. What products you supply?
Our products include grease electric lubrication pumps, oil electric lubrication pumps, oil-air lubrication pumps, single point lubrication pumps, oil-mist lubrication pumps, oil circulation lubrication pumps, manual lubrication pumps, lubrication distributors and lubrication accessories, etc
3. What markets do your pumps export to?
Europe, North & South America, South-East Asia, Africa, Oceanica, Middle East countries. Our overseas agent in Italy, Russia, America and Africa are gradually improving.
4. What information should I let you know if I want to get a quotation?
Please let us know the pump capacity, system, application scenario, operation situation, quantity, etc. As much as your provide, the precision and accurate model selection.
5. Is it available to print our own brand on the pump?
Totally acceptable as international rules.
6.Can you make according to customer require?
Yes, we can make according to your sample or drawing, OEM/ODM service provided.
7.What is your packing?
Netural packing or DAS logo carton packing,or customized box design packing.
8. What is your delivery time?
If we have stock, we can ship within one week. If not, takes about 10-45days depends on order quantity.
9. How can I get the price of your pumps?
You can connect with us through any of the following contact information. Our personalized service person will respond you within 24 hours.
10. What payments can you accept?
T/T, L/C, and Western union,cash.
11. Can you arrange shipment to our warehouse?
Yes, we have long term professional cooperated shipment agent to handle goods to your sea port and can delivery to door as require.
