Audited Supplier
FMBR80-125
Microfiltration Machine
Physical Treatment
Industrial
PVDF
0.1um
1810*512*14mm
ABS
40 - 200 Square Meters
10-12L/Min for Each Plate
SS304
16-130 M3/Day
RisingSun
Wooden Box
China
84212990
Product Description
Membrane bioreactor (MBR) is the combination of a membrane process like microfiltration or ultrafiltration with a biological wastewater treatment process and the activated sludge process.
MBR process VS traditional wastewater treatment process.
You can see MBR module systems replace the Clarifier, Sand filter and Disinfection processes used in Conventional Activated Sludge (CAS) process by removing the suspended materials with UF/MF membrane. The membrane modules are submerged in a biological tank or side streams tank, with the water being drawn through the membranes under vacuum, leaving the suspended biomass material in the biological aeration tank. The MBR systems have a smaller footprint than CAS systems, produce consistent effluent quality even in varying influent conditions
It is now widely used for municipal and industrial wastewater treatment.
RisingSun flat sheet membrane is made of PVDF material, which has better chemical stability, fouling resistance and mechanical strength. With advanced membrane fabrication technology, we control the membrane pore size around 0.1 um to get a higher water flux and water quality.
Benefits:
The mortise and tenon structure is used in the support plate to get a more stable spacing without side panels. The support plate can be installed from top or one side without the limits of the construction site conditions.
SUN® PVDF membrane electron micrograph
Flat sheet MBR element
MBR membrane cartridge specifications:
Note: For different water quality, there will be a different water flow rate. So the user should fully test the membrane module.
This parameter is tested at 25 ºC , -10KPa suction vacuum conditions based on municipal wastewater.
MBR membrane module specifications:
Note: We can provide a single membrane element and any size frame to meet customer's different requests.
Such as: FMBR80-175, FMBR80-200, FMBR80-250, FMBR160-200(single deck) etc.
MBR completed module pictures:
Immersed MBR Cassette for Waste Water Treatment/Industry ETP/Domestic sewage/Landfill leachate treatment/
PVDF membrane Cross refer: Kubota and Toray Japan
FAQ
1, Q: Are you manufacturer?
A:Yes, definitely,our factory locate in Beijing,China.
2, Q:What's your main products ?
A: we manufactur filter membranes, RO, NF, UF, MF membrane, spiral wound/flat sheet membrane, tubular membrane, MBR, DTRO,
STRO,E-coat UF membrane, anode cell etc.
3, Q: what's your main market?
A:There're about 94 countries we've been exported, mainly in USA, Korea, UK, France, Russia, Germany, India, Spain, Brazil etc.
4, Q:Can you supply free sample?
A:Yes, we can supply free samples which are in stock, and the freight charge should be on your side.
5, Q: What about the package?
A:The membrane elements are wrapped with plastic bubble paper, then carton box, safe wooden box outise, the breakage is less than
1%.
6, Q: Do you offer OEM?
A: Sure!
MBR process VS traditional wastewater treatment process.
You can see MBR module systems replace the Clarifier, Sand filter and Disinfection processes used in Conventional Activated Sludge (CAS) process by removing the suspended materials with UF/MF membrane. The membrane modules are submerged in a biological tank or side streams tank, with the water being drawn through the membranes under vacuum, leaving the suspended biomass material in the biological aeration tank. The MBR systems have a smaller footprint than CAS systems, produce consistent effluent quality even in varying influent conditions
It is now widely used for municipal and industrial wastewater treatment.
RisingSun flat sheet membrane is made of PVDF material, which has better chemical stability, fouling resistance and mechanical strength. With advanced membrane fabrication technology, we control the membrane pore size around 0.1 um to get a higher water flux and water quality.
Benefits:
The mortise and tenon structure is used in the support plate to get a more stable spacing without side panels. The support plate can be installed from top or one side without the limits of the construction site conditions.
SUN® support plate
SUN® PVDF membrane electron micrograph
Flat sheet MBR element
MBR membrane cartridge specifications:
| Items | 0.5m2 type | 0.8m2 type | 1.6m2 type |
| Model | FMBR5 0 | FMBR80 | FMBR160 |
| Size (L×W×T) (mm) | 640×510×13 | 1020×510×14 | 1810×512×14 |
| Membrane effective area (m2) | 0.5 | 0.8 | 1.6 |
| Weight (kg) | 1.0 | 1.5 | 5.0 |
| Permeate flux[l /( pc·d )] | 200-340 | 320-550 | 640-1100 |
| Membrane material | PVDF | PVDF | PVDF |
| Membrane pore size(μm) | 0.1 | 0.1 | 0.1 |
| Plate material | ABS | ABS | ABS |
| Air flow rate[l /( min·pc )] | ≥ 8 | ≥ 10 | ≥ 12 |
| pH | 3-12 | 3-12 | 3-12 |
| Output turbidity (NTU) | < 1.0 | < 1.0 | < 1.0 |
| Output SS (mg/l) | ≤ 5.0 | ≤ 5.0 | ≤ 5.0 |
| Chemical cleaning | ~ 5,000mg/l NaClO | ~ 5,000mg/l NaClO | ~ 5,000mg/l NaClO |
This parameter is tested at 25 ºC , -10KPa suction vacuum conditions based on municipal wastewater.
MBR membrane module specifications:
| Items | FMBR80 | FMBR160 | |||||||
| Model | FMBR80-50 | FMBR80-125 | FMBR160-50 | FMBR160-125 | |||||
| Permeate flux (m3/d) | 16-26 | 38-65 | 32-50 | 75-130 | |||||
| Plate qty. (pc) | 50 | 125 | 50 | 125 | |||||
| Membrane effective area (m2) | 40 | 100 | 80 | 200 | |||||
| Size (mm) (L×W×H) | 820X600X1680 | 1885X600X1680 | 830X620X2550 | 1880X620X2550 | |||||
| Air flow rate (L/min) | 500 | 1250 | 600 | 1500 | |||||
| Weight (kg) | 120 | 230 | 400 | 900 | |||||
Such as: FMBR80-175, FMBR80-200, FMBR80-250, FMBR160-200(single deck) etc.
MBR completed module pictures:
Immersed MBR Cassette for Waste Water Treatment/Industry ETP/Domestic sewage/Landfill leachate treatment/
PVDF membrane Cross refer: Kubota and Toray Japan
FAQ
1, Q: Are you manufacturer?
A:Yes, definitely,our factory locate in Beijing,China.
2, Q:What's your main products ?
A: we manufactur filter membranes, RO, NF, UF, MF membrane, spiral wound/flat sheet membrane, tubular membrane, MBR, DTRO,
STRO,E-coat UF membrane, anode cell etc.
3, Q: what's your main market?
A:There're about 94 countries we've been exported, mainly in USA, Korea, UK, France, Russia, Germany, India, Spain, Brazil etc.
4, Q:Can you supply free sample?
A:Yes, we can supply free samples which are in stock, and the freight charge should be on your side.
5, Q: What about the package?
A:The membrane elements are wrapped with plastic bubble paper, then carton box, safe wooden box outise, the breakage is less than
1%.
6, Q: Do you offer OEM?
A: Sure!
