Audited Supplier
Inconel 625
Round
AISI, ASTM, DIN, JIS, GB
as Attached
Hot Rolled
Round
Polished
High-strength Steel Plate, Wear Resistant Steel, Silicon Steel, Cold Heading Steel, Free Cutting Steel, Mold Steel
Tool Steel Bar
Stock
Customized
Fob CIF CFR CNF Exwork
5-30 Days
Nickel Alloy
Annealing/Mirror/Polish/Pickled
Coated
without
Plastic Wraping
DN10~450
China
76210000
Product Description
Specifications
100% PMI;100% Hydrostatic Test or 100% NON-DESTRUCTIVE Test
Description & Name: Inconel 625 pipe UNS N06625 nickel alloy seamless tube ASME SB444
Standard: ASTM/ASME B/SB 444
Material: Inconel 600,625,617,690,693, Monel 400, Monel K500,Incoloy800/800H/800HT,825, Alloy20,Alloy28. Hastelloy C276,AL6XN,N08028 etc.
Nominal Dia: 1/2 "to 10" NB for seamless pipe
Schedules: 5S, 10S, 40S, 80S, 10, 20, 30...120, 140, 160, XXS
All dimensions are in accordance with ANSI B36.19 and ANSI B36.10
Size Range for tubing: OD:1/4" (6.25mm) to 8" (203mm), WT 0.02" (0.5mm) to 0.5"(12mm)
Length:
30 m(Max) or as your requirement
Process:
Cold drawn, Cold rolled, Precision Rolled for Seamless Pipe or Tube
Finish: Annealed & pickled, bright annealing, polished
Ends: Beveled or plain end, square cut, burr free ,Plastic Cap at Both end
Packing: Bare packing/bundle packing with woven bag/wooden or steel frame crate packing/plastic cap protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.
Inspection and Test Procedure
>>Seamless Pipe Production Facilities
>>Production Process
>>Laboratory Instrument & Test Equipment
100% PMI;100% Hydrostatic Test or 100% NON-DESTRUCTIVE Test
Description & Name: Inconel 625 pipe UNS N06625 nickel alloy seamless tube ASME SB444
Standard: ASTM/ASME B/SB 444
Material: Inconel 600,625,617,690,693, Monel 400, Monel K500,Incoloy800/800H/800HT,825, Alloy20,Alloy28. Hastelloy C276,AL6XN,N08028 etc.
| UNS N06625 Chemical Composition% | |||||||||||||
| Alloy Designation | Element | C | Ni | Cr | Mn | Fe | Si | Mo | Al | Ti | Co+Ta | P | S |
| Inconel 625 | Min. % | - | 58 | 20 | - | - | - | 8 | - | - | 3.15 | - | - |
| Max. % | 0.1 | - | 23 | 0.5 | 5 | 0.5 | 10 | 0.4 | 0.4 | 4.15 | 0.015 | 0.015 | |
| Mechanical Propeties | Inconel625 | |
| Density: | 8.4g/cm3 | |
| Melting Point: | 1290-1350°c | |
| Tensile Strength Min.(Mpa): | 690 | |
| Yield Strength Min. (MPa): 0.2% offset | 276 | |
| Elongation A 5%(min.): | 30 | |
| HB Max.: | 220 | |
Nominal Dia: 1/2 "to 10" NB for seamless pipe
Schedules: 5S, 10S, 40S, 80S, 10, 20, 30...120, 140, 160, XXS
All dimensions are in accordance with ANSI B36.19 and ANSI B36.10
Size Range for tubing: OD:1/4" (6.25mm) to 8" (203mm), WT 0.02" (0.5mm) to 0.5"(12mm)
Length:
30 m(Max) or as your requirement
Process:
Cold drawn, Cold rolled, Precision Rolled for Seamless Pipe or Tube
Finish: Annealed & pickled, bright annealing, polished
Ends: Beveled or plain end, square cut, burr free ,Plastic Cap at Both end
Packing: Bare packing/bundle packing with woven bag/wooden or steel frame crate packing/plastic cap protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.
Inspection and Test Procedure
| 1.100% PMI,Spectro Chemical Aanlysis Test for Raw Material |
| 2.100% Dimension & Visual Examination |
| 3. Mechanical Properties Test Include Tension Test,Flaring Test (For Seamless tube/pipe)/ Flange Test (For Welded Pipe & Tube), Hardness Test ,Reversed Flattening Test |
| 4.100% Hydrostatic Test or 100% NON-DESTRUCTIVE Test (ET or UT) |
| 5.Radiographic Test for Welded Pipe (shall be accordance with specification,or shall be as agreed upon between the purchaser and vendor) |
| 6.Straightness Test (optional) |
| 7.Roughness Test (optional) |
| 8.Intergranular Corrosion Test(optional) |
| 9.Impact Test (optional) |
| 10.Grain Size Determinations (optional) |
| NOTES : ALL THE TESTS AND INSPECTION RESULT NEED TO BE SHOWED IN REPORTS ACCORDING TO STANDARD AND SPECIFICATION. |
>>Seamless Pipe Production Facilities
>>Production Process
>>Laboratory Instrument & Test Equipment
