Audited Supplier
Inconel 783 forged pipes
Metal
Forging
Forging
Machinery Parts
Steel
Quenching
Polishing
+/-0.5mm
AISI
CE
as Per The Clients
Inconel 783
LY
Wooden or Steel Frame Crate Packing
CE
Jiangyin
722840000
Product Description
We are professional Inconel 783 Forged Sleeves Bushes Bushing Pipes Tubes Piping Tubing Parts(Alloy 783,UNS R30783,Inconel783) factory from china
Chemical Composition
The chemical composition of INCONEL 783 is outlined in the following table.
Physical Properties
The physical properties of INCONEL 783 are tabulated below.
Mechanical Properties
The following table shows mechanical properties of INCONEL 783.
We could make forged rings with diamter from 80MM to 6000MM, with weight from 10KGS to 15000KGS
We are equiped with 1 tons, 3 tons, 5 tons, 9 tons open die forging parts hammer, 5000 tons hydraulic press, and 1 metres, 6 metres seamless rolled rings machine.
Heat treatment:
Normalized / Annealed / Quenched / tempered
Surface Treatment:
painting,plating,polishing,black oxide,transparent anti-rust oil
Quality control:
UT,MT,RT,PT,chemical composition test,mechanical property test,etc.
Inspection:
1, Raw material certificate(material chemical composition) 2, Heat treatment sheet report
3, Dimension inspection report 4, UT test report
Delivery condition:
Hot forged +Rough machined (black surface after Q /T)+ Turned
Competitive Advantage:
Quality control and management to the whole produce process, including ingot smelting, forging, heat treatment, machining and strictly final inspection prior to delivery.
Excellent product quality and service, competitive price, "in-time" delivery
Welcome the inquiry
Chemical Composition
The chemical composition of INCONEL 783 is outlined in the following table.
Element | Content (%) |
|---|---|
| Nickel, Ni | 26-30 |
| Iron, Fe | 24-27 |
| Aluminum, Al | 5-6 |
| Chromium, Cr | 2.5-3.5 |
| Niobium, Nb | 2.5-3.5 |
| Copper, Cu | 0.50 max |
| Manganese, Mn | 0.50 max |
| Silicon, Si | 0.50 max |
| Titanium, Ti | 0.10-0.40 |
| Carbon, C | 0.03 max |
| Boron, B | 0.003-0.012 |
| Phosphorus, P | 0.015 max |
| Sulfur, S | 0.005 max |
| Cobalt, Co | Balance |
Physical Properties
The physical properties of INCONEL 783 are tabulated below.
Properties | Metric | Imperial |
|---|---|---|
| Density | 7.81 g/cm3 | 0.282 lb/in3 |
| Melting point | 1336-1407 °C | 2437-2565 °F |
Mechanical Properties
The following table shows mechanical properties of INCONEL 783.
Properties | Metric | Imperial |
|---|---|---|
| Tensile strength | 1194 MPa | 171 ksi |
| Yield strength | 779 MPa | 113 ksi |
| Poisson's ratio | 0.31 | 0.31 |
| Elastic modulus | 177.3 GPA | 25.72 ksi |
| Elongation at break | 24% | 24% |
We are equiped with 1 tons, 3 tons, 5 tons, 9 tons open die forging parts hammer, 5000 tons hydraulic press, and 1 metres, 6 metres seamless rolled rings machine.
Heat treatment:
Normalized / Annealed / Quenched / tempered
Surface Treatment:
painting,plating,polishing,black oxide,transparent anti-rust oil
Quality control:
UT,MT,RT,PT,chemical composition test,mechanical property test,etc.
Inspection:
1, Raw material certificate(material chemical composition) 2, Heat treatment sheet report
3, Dimension inspection report 4, UT test report
Delivery condition:
Hot forged +Rough machined (black surface after Q /T)+ Turned
Competitive Advantage:
Quality control and management to the whole produce process, including ingot smelting, forging, heat treatment, machining and strictly final inspection prior to delivery.
Excellent product quality and service, competitive price, "in-time" delivery
Name&Description | Capacity | Quantity |
3600Thydraulic press | Max. single forging in 18T | 1 |
2000T hydraulic press | Max. single forging in 9T | 2 |
800 hydraulic press | Max. single forging in 5T | 1 |
6T electrical hydraulic hammer | Max.single forging in 5T | 1 |
3T electrical hydraulic hammer | Max.single forging in3T | 1 |
Air hammer | Max.single forging from250kg to 1000kg | 7 |
Forging operation machine | Max.singe forging from20T-5T | 7 |
Heat treatment Furance | Max.8000*5000*1500mm | 11 |
CNC driling machine | Max.5000mm | 2 |
Vertical lathe | From 1600 to 5000mm | 60 |
Horizontal lathe | Max.5000mm | 70 |
Band sawing machine | 260-1300mm | 36 |
Welcome the inquiry
