Audited Supplier
The floor scrubber has the advantages of convenient operation, safe use, high cleaning efficiency and remarkable cleaning effect, whichis an ideal choice to replace the conventional brushing machine, It is especially suitable used for large and medium-sized public places such as: hotels, office buildings, exhibition venues, and schools. It is an indispensable cleaning device in model cleaning machinery!
Part II: Features of Floor Scrubber
1):Large opening to the recovery tank allows easy cleaning and maintane for floor scrubber
2):Four-joint-rod construction to make sure the reliable lifting system for brush and squeegee
3):Adjustable scrubbing squeegee pressure ensure a perfect cleaning application from daily scrubbing to restoration
4):With unique rubber edge on the brush cover to prevent water throwing out from the brush plaste
5):Automatic and manual operation mode are both optional,single function can be availble by step under the manual operation mode
Part III: Advantage of floor scrubber
1.Suction Motor, we use AMETEK.
2.About Controller, we use PG, and for floor scrubber brush pan, our company is use Malish.
3.Lead acid maintenance free battery and so on.
4.Glue: Rubber Absorbent Strip: PU material oil absorbent adhesive strip, rubber material wear-resistant adhesive strip
Our floor scrubber is widly used in public places, such as hospital, underground garage, shopping mall, air port,and factory.Part IV: Applicable floor materials
The floor scrubber applies to municipal building site,square,super market ,factories ,workshop and a variety of public places.
And can clen Terrazzo floor, PVC hard floor, Vitrified brick floor, Epoxy floor, Emery wear-resistant floor and concrete/cement floor etc..
Each machine is put on a polywood pallet, then carton;
Wooden box or air bubble film and carton for plastic products or as your request.
Normally, for testing sample, we can arrange the delivery within 7 days;
Part VI: FAQ
Q:Why can't the floor scrubber water absorption motor start?
1. Check whether the water volume of sewage tank is full.
2. Check whether the water level sensor in the sewage tank is blocked by foreign matters or fails.
Q:Why is sewage left on the ground?
1. Check whether the water absorption rubber strip is worn.
2. Check whether there is any foreign matter between the two suction strips.
3. Check the suction pipe for foreign material.
4. Check whether the suction filter is damaged or not clean.
5. Check whether the sealing ring of the sewage tank cover is in good condition.
6. Check whether the suction pipe is correctly connected to the suction grill.
Q:Why is the ground stained?
A:Check whether the brush / cleaning pad is used to clean the floor and stains.
Q: Why are water stains left on the ground?
A: 1. Whether the cleaned ground belongs to soft ground.
2. Check whether there is any foreign matter between the two suction strips.
3. Check whether the water absorption rubber strip is worn.
4. Check whether the suction grill is adjusted correctly.
