Industrial Ultra Pure Water Equipment

Industrial ultra pure water equipment

Main   Products

  Is a water purifier that uses the principle of reverse osmosis technology to filter water. Under a certain pressure, water molecules (H2O) can pass through the RO membrane, while inorganic salts, heavy metal ions, organics, colloids, bacteria, viruses and other impurities in the source water cannot pass through the RO membrane, so that part of the water is separated through the RO membrane, and the non permeated water forms concentrated water due to the increase of solutes.

 
 Process for Industrial Pure Water Equipment:
Raw water (with pressure protection) → Booster pump → Sand filter → Carbon filter → Softener (not suitable according to region) → Precision filter (or security filter) → Two end water tanks → RO front water pump → Tight filter (or security filter) → RO high-pressure pump → RO reverse osmosis system → RO water tank → RO water booster pump → Mixed bed → Terminal tight filtration → UV ultraviolet sterilization → Equipment water (water quality can reach above 15M Ω. cm, i.e. 0.066) μ Industrial (also known as ultrapure water machines, ultrapure water equipment, etc.)/semiconductor ultrapure deionized water below s/cm, 25 ºC

RO (Reverse Osmosis) reverse osmosis technology is a membrane separation and filtration technology that utilizes pressure gauge difference as the power. It originated from the research of aerospace technology in the 1960s in the United States and gradually transformed into civilian use. It has been widely used in fields such as scientific research, medicine, food, beverage, seawater desalination, etc.
The pore size of the RO reverse osmosis membrane is as small as nanometers (1 nanometer=10-9 meters). Under a certain pressure, H2O molecules can pass through the RO membrane, while impurities such as inorganic salts, heavy metal ions, organic matter, colloids, bacteria, viruses, etc. in the source water cannot pass through the RO membrane, strictly distinguishing between pure water that can pass through and concentrated water that cannot pass through.
The RO membrane has a removal rate of over 99% for high valent ions, colloids, bacteria, and organic substances with a molecular weight greater than 300 daltons (including heat sources), and 95% for low valent ions (NA+, K+). When the source water conductivity is<3505µ S/cm, RO pure water conductivity usually ≤ 55µ S/cm, in compliance with the national tertiary water use standard. After undergoing atomic level ion exchange column circulation filtration, the water yield can reach 18.2M Ω. cm.

Reverse osmosis is the most economical method that can achieve a 90% to 99% impurity removal rate, and is also the best pre-treatment method for reagent grade ultrapure water systems.

Brief Introduction

  The main separation object of the reverse osmosis membrane is the ions in the solution. It does not need chemicals and can effectively remove the salt in the water. The desalination rate of the system is generally more than 98%.          

  Reverse osmosis is the most advanced, energy-saving and environmental protection desalination method, and has also become the mainstream pre desalination process.          
  Industrial use can be less than 1;