Audited Supplier
Anthracite filter media is a kind of filter used in water treatment. It can be applied in the treatment of common acid, the middle degree alkali. The product has large surface area, and its various indexes all exceed the Construction Department's standard. Anthracite filter media is especially selected from the deep well minerals, so it contains the highest percentage of carbon.The raw material is always filtered and washed to make sure that the product can have good effect on water filtration.
| Chemical characteristics | |
| Size | 0.8-1.6mm,1-2mm,2-4mm |
| Fixed carbon | 60-90% |
| Porosity | 43-53% |
| Density | 1.4-1.6g/cm |
| Attrition loss | ≤1.3% |
| Vol.Matter | ≤2.0% |
| Sulphur content | ≤0.36% |
| Ash content | ≤8.0% |
| Moisture content | ≤0.6% |
| Bulk density | 0.947g/cm3 |
| Sulfur(S) | ≤0.05% |
| Zinc(Zn) | ≤0.04% |
The anthracite filter undergoes a series of strict processing procedures, widely used in different kind of water purification. It is a necessary filter material in the double layer filter and three layer filter. Our products mainly used in the water treatment of chemical industry, metallurgy, pyroelectricity, pharmacy, papermaking, printing and dyeing and food industry.
Anthracite Filter Media are filtration materials for turbidity and SS removal. Since the specific gravity is lighter than that of Filter Sand, it is much used in combination with Filter Sand in dual-media filtration, to consist reverse grain layers after backwashing. In addition, because of high content carbon of this product, it has high resistance to various chemicals and high physical strength so that it is widely used for city and industrial water purification.
1000kg (2200lb)/jumbo bag or as requirement
Delivery Details : 3-25 days after payment according to your order quantities
Shipping:
1.20GP FCL: 10-15 tons
2.40GP FCL: 20-26 tons
3.40HQ FCL: 22tons/26tons
