Audited Supplier
Yes
One Year
AC220V/50Hz
3500W
up to 750c
1-24m/Min
0.35-0.6MPa
20mm,30mm,40mm,50mm
1600 X 650 X 1500mm
245kg
Huijian
Ply Wooden Case
1600 x 650 x1500 mm
China
8413210090
Product Description
Technical Data :
Model: CH-A12
Voltage: AC220V/50Hz
Output power: 3500W
Heat control: Up to 750°C
Working speed: 1-24m/min
Pressure: 0.35-0.6Mpa
Roller width: 20mm,30mm,40mm,50mm
Machine dimension: 1600 x 650 x 1500mm
Net Weight: 245 Kg
Introduction Of Hot Air Welding Machine:
Hot air welding machine has unique advantage in inflatable products made of membranes structure, which is total different with high frequency welding and hot melt welding technology, the hot air is blew between the sealing surface, under necessary suitable pressure to get perfect welding effect, PVC, TPU material are all available, which are made to water polo, water drum, grass ball, inflatable swimming pool, large inflatable tents, inflatable boats, rubber boats and fishing boats and etc.
Purpose:
Hot air welding machine is suitable to produce all kinds of waterproof product which is made from coated PU,PVC,TPU, PE, PVA, such as large tent, inflatable boat and children toys, car covering,etc.
Welding Material:
1.Vinyl (PVC) laminated fabric
2.Vinyl coated fabrics
3.Vinyl Films
4.Polyurethane film
5.Polypropylene coated fabric
6.Polyethylene (PE)
7.Thermoplastic rubber (TPR) film
8.Thermoplastic rubber fabrics
9.Nonwoven polyester
10.Various fusing tapes
11.Weldable webbings
12.Rigid extruded products
Features Of Hot Air Welding Machine:
1.Original imported computer chip design , can be programmed in accordance wit user's requirements,microcomputer automatic control the whole machine ,simple operation , stable performance action, low failure rate .
2.It is 3 inch panasonic touch screen and can directly show all kinds of data.
3.Temperature is automatic tracking controlled by computer and its precision can reach +/-1.
4.The temperature is controlled by computer chip.twospeed motor.separate upper and lower roller motor , can adjust its speed .
5.Turn on the heating button , later turn it off and then delay the shut down , get into count down
6.No table, wide lower prop design ,suit to processing the large tents, rubber boats , air balloon, seamless sewing products, etc.
7.This model is suitable for processing the rubber boat's head, special to seaming the round corner . circular cone etc.
