Audited Supplier
Imidacloprid
138261-41-3
C9h10cln5o2
138261-41-3
Powder
Organic Synthesis
Low Toxicity of Reagents
Contact Insecticide
Nerve Poison
MOLOTUS
200L 25kg 20L 10L 5L 1L 1kg 100g
TC WP EC WDG SL
China
3808
Product Description
Technical: 95% min.
Formulation: Imidacloprid 70% wp, 25% wp, 10% wp, 200g/l SL, 100g/l SL
Chemical name: 1-((6-chloro-3-pyridinyl) methyl)-n-nitro-imidazolidinimine
CAS reg no.: 138261-41-3
Molecular formula: C9h10cln5o2
Molecular mass: 255.7
Technical standard:
Imidacloprid 95% min. Tc
Appearance white powder
A. I. Content, % 95 min.
Loss on drying, % 1.0 max.
Soda, % 0.2 max.
Formulation standard:
Imidacloprid 70% wp
Appreance white powder
A. I. Content, % 70.0 min.
Suspensibility, % 80.0 min
Wet sieve test(44um) s 98.0 min
Imidacloprid 70% ws
Appreance pink powder
A. I. Content, % 70.0 min.
Suspensibility, % 80.0 min
PH value 5.0-7.0
Water content, % 2.0 max.
Imidacloprid 25% wp
Appreance white powder
A. I. Content, % 25.0 min.
Suspensibility, % 80.0 min
Wet sieve test(44um) s 98.0 min
Imidacloprid 10% wp
Appreance white powder
A. I. Content, % 10.0 min.
Suspensibility, % 80.0 min
Wet sieve test(44um) s 98.0 min
Imidacloprid 200g/l SL
Appreance yellow transparent liquid
A. I. Content, g/l 200.0 min.
Water content, % 0.5 max
Dilution stability(200times) qualified
Low-temperature qualified
High-temperature qualified
Imidacloprid 100g/l SL
Appreance yellow transparent liquid
A. I. Content, g/l 100.0 min.
Water content, % 0.5 max
Dilution stability(200times) qualified
Low-temperature qualified
High-temperature qualified
Packing:
Powder: 25kg drum or customized
Liquid: 200ltr plastic drum or customized
Physicochemical properties
Density: 1.54
M. P.: 144º C
Vapour pressure, pa at 20º C: Negligible
Solubility (20º C): In water 0.061 g/100ml
Octanol/water partition coefficient as log pow: 0.57
Spillage disposal: : Sweep spilled substance into containers. Carefully collect remainder, then remove to safe place. Personal protection: P2 filter respirator for harmful particles. Do not let this chemical enter the environment.
Storage: Separated from food and feedstuffs.
Toxicological:
Imidacloprid given orally as a single dose was moderately toxic to rats (ld50, 380- 650 mg/kg bw) and mice (ld50, 130- 170 mg/kg bw). Behavioural and respiratory signs, disturbances of motility, narrowed palpebral fissures, transient trembling and spasms were seen in rats and mice treated orally at doses > 200 mg/kg bw and > 71 mg/kg bw, respectively. The clinical signs were reversed within 6 days. Imidacloprid given intraperitoneally showed moderate to low acute toxicity in rats, the signs being similar to those after oral administration. Very little toxicity was seen after acute dermal application. The LC50 for a single exposure to an aerosol could not be determined exactly, as rats tolerated inhalation for 4 h of the maximum concentration of dust that could be produced technically (0.069 mg/l of air) without signs or deaths.
Formulation: Imidacloprid 70% wp, 25% wp, 10% wp, 200g/l SL, 100g/l SL
Chemical name: 1-((6-chloro-3-pyridinyl) methyl)-n-nitro-imidazolidinimine
CAS reg no.: 138261-41-3
Molecular formula: C9h10cln5o2
Molecular mass: 255.7
Technical standard:
Imidacloprid 95% min. Tc
Appearance white powder
A. I. Content, % 95 min.
Loss on drying, % 1.0 max.
Soda, % 0.2 max.
Formulation standard:
Imidacloprid 70% wp
Appreance white powder
A. I. Content, % 70.0 min.
Suspensibility, % 80.0 min
Wet sieve test(44um) s 98.0 min
Imidacloprid 70% ws
Appreance pink powder
A. I. Content, % 70.0 min.
Suspensibility, % 80.0 min
PH value 5.0-7.0
Water content, % 2.0 max.
Imidacloprid 25% wp
Appreance white powder
A. I. Content, % 25.0 min.
Suspensibility, % 80.0 min
Wet sieve test(44um) s 98.0 min
Imidacloprid 10% wp
Appreance white powder
A. I. Content, % 10.0 min.
Suspensibility, % 80.0 min
Wet sieve test(44um) s 98.0 min
Imidacloprid 200g/l SL
Appreance yellow transparent liquid
A. I. Content, g/l 200.0 min.
Water content, % 0.5 max
Dilution stability(200times) qualified
Low-temperature qualified
High-temperature qualified
Imidacloprid 100g/l SL
Appreance yellow transparent liquid
A. I. Content, g/l 100.0 min.
Water content, % 0.5 max
Dilution stability(200times) qualified
Low-temperature qualified
High-temperature qualified
Packing:
Powder: 25kg drum or customized
Liquid: 200ltr plastic drum or customized
Physicochemical properties
Density: 1.54
M. P.: 144º C
Vapour pressure, pa at 20º C: Negligible
Solubility (20º C): In water 0.061 g/100ml
Octanol/water partition coefficient as log pow: 0.57
Spillage disposal: : Sweep spilled substance into containers. Carefully collect remainder, then remove to safe place. Personal protection: P2 filter respirator for harmful particles. Do not let this chemical enter the environment.
Storage: Separated from food and feedstuffs.
Toxicological:
Imidacloprid given orally as a single dose was moderately toxic to rats (ld50, 380- 650 mg/kg bw) and mice (ld50, 130- 170 mg/kg bw). Behavioural and respiratory signs, disturbances of motility, narrowed palpebral fissures, transient trembling and spasms were seen in rats and mice treated orally at doses > 200 mg/kg bw and > 71 mg/kg bw, respectively. The clinical signs were reversed within 6 days. Imidacloprid given intraperitoneally showed moderate to low acute toxicity in rats, the signs being similar to those after oral administration. Very little toxicity was seen after acute dermal application. The LC50 for a single exposure to an aerosol could not be determined exactly, as rats tolerated inhalation for 4 h of the maximum concentration of dust that could be produced technically (0.069 mg/l of air) without signs or deaths.
