
1.UF Introductionmechanical separation membrane separation process, namely under certain pressure, when the mixed solution of large molecules or a small molecule solute through the membrane surface, solvent (e.g., inorganic salt) and small molecule solutes through the membrane, and the solute molecules due to mechanical filtration membrane as concentrate intercept, So as to achieve the purpose of purification, separation and concentration.
| Material | Property | OD | ID | Pore Size | MWCO |
| PES | hydrophilic | 1.4mm | 0.7mm | 0.01~0.04µm | 67,000 dalton |
| PAN | hydrophilic | 2.3mm | 1.4mm | 0.02~0.1µm | 80,000 -100,000dalton |
| PVDF | hydrophilic | 1.4mm | 0.7mm | 0.05~0.1µm | 100,000-150,000 dalton |
resistance, high temperature resistance, high mechanical strength and cleaning resistance;It is widely used in food industry,
electroplating industry, pharmaceutical industry, fermentation liquid separation and concentration, and cathodic electrophoretic
paint recycling. Molecular Weight Cut Off ( MWCO) : 67,000 Dal
| Spec. | Outer Size (mm) | Distance from side to center(mm) | Materials | Effective Area | Design Flux(m³·0.1Mpa/25ºC | Run mode | Link calibre |
| UFaIB90 | 90*1100 | 910 | PES PAN PVDF | 4.5 | 0.2-0.4 | in-outside | 32 |
| UFaIA160 | 160*1330 | 990 | 18 | 0.8-1.2 | 32/40 | ||
| UFaIB200 | 200*1410 | 1000 | 20 | 1.0-1.4 | 50 | ||
| UFaIA225 | 225*1730/1760 | 1600/1630 | 40 | 1.5-3.0 | 50 | ||
| UFaIA250 | 250*1715/1813 | 1600/1700 | 55 | 2.0-3.5 | 50 | ||
| UFaI4040 | 90*1016 | / | 4 | 0.2-0.3 | 19 | ||
| UFaI8040 | 200*1016 | / | 18 | 0.2-1.2 | 28.7 | ||
| UFaI8060 | 200*1527 | / | 40 | 1.5-2.8 | 42.6 |
B.Operating Pressure:≤0.3Mpa
C.Max Tolerance Pressure:0.5Mpa
D.PH:2-12
E.Membrane Module Encapsulation Materials:Food Grade Epoxy Resin
















Audited Supplier










