Audited Supplier
Ceramic fiber bulk melts clay clinker, alumina powder, silica powder, chromite sand and other raw materials at high temperature in an industrial electric furnace to form a fluid. Then use compressed air to blow or spin the fiber into a fibrous shape, and collect the cotton through the cotton collector to form ceramic fiber cotton. It has the characteristics of light weight, high strength, low thermal conductivity, good flexibility, small heat resistance and sound insulation.
As the crucial and staple materials for producing ceramic fiber blanket, board, module and other formed products, ceramic bulk fiber is normally manufactured from high purity raw materials-alumina powder, silica sand through unique production techniques of spun or blowing, these bulks are loose, long and flexible with fine thermal properties, at present, the chopped fibers are vacuum formed production, the lubricated bulk fibers are the fiber for textiles are all available. Ceramic bulk fibers Serve as ab ideal filler for various types of refractory lining and insulation tools.
Even if the finished product is wetted by oil, water or steam, its physical properties such as temperature resistance and heat insulation will not change. Fiber cotton can be further processed into fiber blankets, felts, boards, paper, cloth, rope and other products.
Brand Properties | STD BULK | HP BULK | HZ BULK | |
Chemical Composition(%) | Al2O3 | ≥44 | ≥45 | ≥34 |
SiO2 | ≥52 | ≥54 | ≥50 | |
Fe2O3 | ≤1.0 | ≤0.5 | ≤0.5 | |
Na2O | ≤1.0 | ≤0.2 | ≤0.2 | |
ZrO2 | - | - | ≥15 | |
Specification Temp. (ºC) | 1260 | 1260 | 1430 | |
Shot content (%) | ≤15 | ≤15 | ≤12 | |
Q1 : How can you control your quality?
A1 : For each production processing, we have complete QC system for the chemical composition and Physical properties. After production, all the goods will be tested, and the quality certificate will be shipped along with goods.
Q2 : What is your lead time?
A2 : It usually needs about 15- 20 days after receiving the PO.
Q3 : Do you provide free samples?
A3 : Yes, free samples are available, generlly speaking, the buyer shall bear all the delivery cost.
Q4 : What is your payments terms?
A4 : We can accept 30% deposit, 70% balance to be against the BL copy or by LC, or other payment terms.
Q5 : Can we visit your company?
A5 : Yes, for sure, you are welcome to visit JUCOS company.
Q6 : What standards do you have?
A6 : Our products meet the standards, such as ASTM, ASME, AMS, DIN, JIS etc.
The third party testing is all available for us.
