Audited Supplier
FRYQ
RoHS, ISO, CE
AC380V
Electric Power
Ordinary Temperature
Flange
Alloy
1 Year
Always Online
4 to 20mA Control Signal
4 to 20mA Control Signal
F
No Swing
S2
IP67 (IP68 Optional)
220V/1pH/50Hz 380V/3pH/50Hz
-10 Degree to 45 Degree
86kpa to 106kpa
Less Than or Equal to 1 Percent
Starting Times Can Reach 600 Times/Hour;
18rpm 24rpm 36rpm 48rpm and So on
Support Profibus-Dpv0/Dpv1, Modbus, Canopen, etc
Explosion Proof Grade Exd II Bt4.
Less Than or Equal to 95 Percent
FRY
Wooden Case
Tianjin, China
Product Description
FRYQ-Multi-turn Electric Actuator 18-40 Type
The advanced intelligent non-invasive electric actuator can offer several option like multi-turn, part-turn and linear-turn.
Sturdy construction, using dual-sealing, and can anti-water and dust
(IP67/IP68-2m, 48 hours) effectively when filed connection.
Three phase, single phase and direct current power supply actuator ,As the built-in data recording mechanism of the standard function
Compatible With IrDATM standard. Make the local and remote analysis on the actuator through insight PC software.
Concise, easy to control, and indication functions
Multi-language text display screen displaying the state and setting
Simple torque and position control, enhancing the reliability
Flexibility of comprehensive control and indication
Optional specification of water proof and explosion proof type
Direct torque output range 35Nm(25 Ibf ft)-1200Nm(860 Ibf ft)
Main Technical Parameters
1.Intrinsic error: ±1%
2.Return difference: 1%
3.Dead zone: 0.5% ~ 10% adjustable
4.Damping force characteristic: dead-beat
5.Protection level: IP67(IP68 optional)
6.Environment temperature: -25ºC ~ +70ºC
7.Relative Humidity: <95%(without condensation)
8.Power supply: 380Va.c(340V~440V), 50Hz/60Hz 3PH
The running performance of the actuator can be guaranteed in the case of the voltage error of ±10% and the frequency error of ±5 Hz. The actuator can start normally in the case of the maximum voltage drop of 15%, and can run as the normal speed.| Model | Revolving Speed (rpm) | Torque (Nm) | Voltage (V) | Phase (Ph) | Frequency (Hz) | Power (kW) | Rated Current (A) | Duty | Weight (kg) |
| FRYQ18 | 18 | 136 | 380 | 3 | 50 | 0.37 | 3.3 | S4(30%) | 30 |
| 24 | 108 | 380 | 3 | 50 | 0.37 | 3.3 | S4(30%) | 30 | |
| 36 | 72 | 380 | 3 | 50 | 0.37 | 3.3 | S4(30%) | 30 | |
| 48 | 54 | 380 | 3 | 50 | 0.37 | 3.3 | S4(30%) | 30 | |
| FRYQ25 | 18 | 400 | 380 | 3 | 50 | 1.1 | 5.8 | S4(30%) | 46 |
| 24 | 400 | 380 | 3 | 50 | 1.1 | 5.8 | S4(30%) | 46 | |
| 36 | 298 | 380 | 3 | 50 | 1.1 | 5.8 | S4(30%) | 46 | |
| 48 | 244 | 380 | 3 | 50 | 1.1 | 5.8 | S4(30%) | 46 | |
| FRYQ35 | 18 | 610 | 380 | 3 | 50 | 1.5 | 9.5 | S4(30%) | 69 |
| 24 | 610 | 380 | 3 | 50 | 1.5 | 9.5 | S4(30%) | 69 | |
| 36 | 542 | 380 | 3 | 50 | 1.5 | 9.5 | S4(30%) | 69 | |
| 48 | 474 | 380 | 3 | 50 | 1.5 | 9.5 | S4(30%) | 69 | |
| FRYQ40 | 18 | 1020 | 380 | 3 | 50 | 2.2 | 14.2 | S4(30%) | 190 |
| 24 | 1020 | 380 | 3 | 50 | 2.2 | 14.2 | S4(30%) | 190 | |
| 36 | 845 | 380 | 3 | 50 | 2.2 | 14.2 | S4(30%) | 190 | |
| 48 | 680 | 380 | 3 | 50 | 2.2 | 14.2 | S4(30%) | 190 | |
| FRYQ70 | 18 | 1490 | 380 | 3 | 50 | 3 | 18.2 | S4(30%) | 200 |
| 24 | 1490 | 380 | 3 | 50 | 3 | 18.2 | S4(30%) | 200 | |
| 36 | 1290 | 380 | 3 | 50 | 3 | 18.2 | S4(30%) | 200 | |
| 48 | 1020 | 380 | 3 | 50 | 3 | 18.2 | S4(30%) | 200 | |
| FRYQ90 | 18 | 2030 | 380 | 3 | 50 | 5.5 | 32 | S4(30%) | 200 |
| 24 | 2030 | 380 | 3 | 50 | 5.5 | 32 | S4(30%) | 200 | |
| 36 | 1700 | 380 | 3 | 50 | 5.5 | 32 | S4(30%) | 200 | |
| 48 | 1355 | 380 | 3 | 50 | 5.5 | 32 | S4(30%) | 200 | |
| FRYQ95 | 18 | 3000 | 380 | 3 | 50 | 7.5 | 42 | S4(30%) | 200 |
| 24 | 3000 | 380 | 3 | 50 | 7.5 | 42 | S4(30%) | 200 |
Due to the inertia effect and abrasion of the drive shaft sleeve, it is recommended that the running should not be too fast while installing in the brake valve directly.
The rated torque is the maximum torque set in two directions. The maximum torque is 1.4 times to 2 times, depending on the valve speed and voltage.
In case of using the maximum torque as required while exceeding 20% of the valve travel, please contact us.
Hart Communication ProtocolHART communication uses a half-duplex communication method, which is characterized by the realization of digital signal communication on the existing analog signal transmission line, which is a transitional product during the transition from analog system to digital system, so it has a strong The market competitiveness has developed rapidly. HART stipulates a series of commands, which work according to the command mode.
Profibus Communication ProtocolPROFIBUS is an international, open field bus standard that does not depend on equipment manufacturers. The transmission speed of PROFIBUS can be selected in the range of 9.6kbaud ~ 12Mbaud and when the bus system is started, all devices connected to the bus should be set to the same speed. It is widely used in manufacturing automation, process industrial automation and building, transportation and other fields of automation. PROFIBUS is a field bus technology used for factory automation workshop-level monitoring and field device layer data communication and control.
Modbus Communication ProtocolModbus is a serial communication protocol published by Modicon (now Schneider Electric) in 1979 for communication using programmable logic controllers (PLCs). Modbus has become the industry standard for industrial communication protocols (De facto) and is now the usual connection between industrial electronic devices.
Bluetooth Communicationω Visualization
ω Debugging convenient
ω Operation and monitoring functions
ω Diagnostic function
ω Diagnostic function
Actuator color can be customized
Valve type can be customized
Valve type can be customizedThe technical selection of different types of valves gives you a comprehensive solution
Note:For better selection,need to provide the valve diameter,pressure,medium and temperature
