Audited Supplier
1. Application:
This type is used for drawing and annealing copper wire and other alloy wire from 2.6-3mm to 0.4-2.0mm.
2.Main feature:
1)Max.Dies Qty: 17
2)Outlet wire size: 0.4-1.6mm
3)Max speed:2000m/min
4) Raw material: copper wire, brass wire
5)Three or four sections vertical annealing.
3-Parameters:
| Machine type | SY-17DHT |
| Control system | PLC |
| Inverter control | Two inverters control |
| Drawing dies No./max. | 17 |
| Inlet diameter | Ø 2.6- 3.0mm |
| Out diameter | Ø0.4- 1.6mm |
| Drawing line speed /max | 2000m/min |
| Slip ratio of m/c | 20% |
| Fix speed capstan slip ratio | 15.5% |
| Frame | Ironed cast |
| Capstan | Carbon fibre plasma capstan |
| Main motor | 55kw |
| Spooler motor | 11kw |
| Fix speed capstan dia. | Ø 250mm |
| Online annealing | 250T/B |
| Annealing voltage | 0-60V |
| Annealing current | 2000A |
| Spool bobbin size | Ø 500mm -630mm |
| Optional take-up machine | 1-Drop coiler 2-Annealing part 3-Dual-spool take-up |
4-Advantage:
1). Special seal system between the gearbox and drawing section to prevent oil leakage and mixing.
2). Ironed cast and Wear-resistant capstan can keep long life.
3). For the Second-section-annealing system, outside electrically neutral (no current flow to another unit)
4). Longer annealing section with tension ensure good and stable elongation.
5). Two types of annealing were available to meet different size ranges and raw materials.
6). Besides normal copper, it also is a good choice for brass and some welding wire.
5-Delivery time: 45~60 working days
6-After-sell service:
The engineer will be dispatched as needed.
The buyer provides engineer's roundtrip flight tickets, board and lodging, the security as well as each person of daily wage.
7-Guarantee: 12 months since shipping date(exclude easily wearing part)
