Audited Supplier
Interventional Materials Balloon Dilatation Catheters Angioplasty Stent Ptca Ballon Catheter
Flexible tapered tip
The flexible tapered tip with an outer diameter of 0.017" adopts a circular wrapping design, which tightly wraps the guide wire to avoid the "fish-mouth effect", and has good vascular permeability, making it easier to pass through the lesion.Clear development and precise positioning
The double developing mark in the balloon adopts a special inlay process, which effectively reduces the outer diameter of the passage, more accurately locates the lesion, and avoids the loss of normal blood vessels.
Semi-compliant balloon
The balloon is designed as a semi-compliant balloon and made of block polyamide, which gives consideration to both compliance and pressure resistance. The balloon dilatation is even and accurate and is not easy to cause vascular dissection.Distal Hypo tube structure
Enhanced flexible design, which is more suitable for intracranial tortuous blood vessels.
Convenient and quick exchange design
The quick exchange system is convenient to operate and saves operation time.
Special coating for pushrods
The distal hydrophilic coating can better pass through the tortuous blood vessels and reach the lesion; the proximal push rod is coated with PTFE, which reduces the vascular friction and enhances the pushablity.
Three-lobe balloon folding technology
The three-lobe balloon folding technology with an outer diameter of only 0.74mm can effectively reduce the outer diameter of the passage; the transitional support steel wire design provides a good driving force, and the balloon's strong retraction capacity makes it easier to withdraw the balloon.
| Balloon diameter/mm | Ballon length /mm | |||||
| 9 | 12 | 16 | 20 | 24 | 30 | |
| 1.5 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 1.75 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 2.0 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 2.25 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 2.5 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 2.75 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 3.0 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 3.5 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 4.0 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Q1. Can I have a sample order ?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than 10000pcs.
Q3. Do you have any MOQ limit ?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order ?
A: Firstly let us know your requirements or application. Secondly We quote according to your requirements or our suggestions. Thirdly customer confirms the samples and places deposit for formal order. Fourthly We arrange the production.
Q6. Is it OK to print my logo?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 1-2 years warranty to our products.
Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%. Secondly, during the guarantee period, we will send new samples with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.
