Jasd-05 Airbag Gas Inflator for Toyota, Honda Series System Gas Generator

Price $15.00 Compare
Min Order 10 Pieces
Availability In Stock
Shipping From Guangdong, China
Popularity 350 people viewed
Quantity
+-
 

Guangzhou Jashine Technology Co., Ltd.

VIP   Audited Supplier 8 years
Profile Certified by SGS/BV
JASD-05
Jasd-05
Aluminum
Airbag Inflator
SRS Inflator
Super
for Auto Part
JASHINE
Bubble Bag and Carton Box
Standard
China
3901100001
Product Description
JASD-05 Airbag gas inflator for toyota,honda series  System Gas Generator
Applicable airbag volume : 70L
It contains compressed air inside
There is exclude flammable, combustible and explosive materials inside

Gas toxicity: No
Temperature of gas producer at air outlet: < 280ºC
All fire current: 1.7A/2ms
No-fire current: 0.2mA/10s
Contains an explosive ignition. In the absence of an external source of electrical impulse ignition is impossible.
Environmental test: According with GB
Aging resistance: According with GB
Waterproof: According with GB
Applicable temperature range:-35~85ºC
Service life: 15 years


Quick Details
Item NameAirbag inflator
With LogoNo
Car MakeJASD-05
Product SizeStandard
MOQ5 PCS each type
Coloras picture 
Materialaluminum
Delivery Time5-10 days after receive payment
Payment TermWestern Union PayPal Money gram T/T
ShipmentBy DHL,EMS,UPS,ARAMEX ,By land or by air to Russia.
Packing Neutral Packing.-- one platic bag. And carton
Picture as below:
 


 

Airbag Inflators Basic Description:

The airbag inflator is one of the many components of an airbag system. The main purpose of an airbag is to slow the passenger's forward motion as evenly as possible immediately after a collision. One of the biggest challenges in early efforts to adapt airbags for use in cars was their high price and the technical difficulties involved in storing and releasing the compressed gas. These difficulties included providing sufficient room for gas storage in the car, maintaining the high pressure of the gas during the lifetime of the car, and producing quick and reliable expansion of the bag without causing injuries. These requirements suggested the need to develop an airbag design based on a chemical reaction that would produce nitrogen gas to inflate the airbag. The first automotive airbags developed in the 1970s employed a solid propellant. These airbag inflation systems reacted sodium azide (NaN3) with potassium nitrate (KNO3) in order to produce nitrogen gas. Hot blasts of nitrogen gas inflated the airbag. Because sodium azide is extremely toxic, these chemicals were widely phased out during the 1990s in favor of more efficient, less expensive, and less toxic alternatives. The alternative propellants may incorporate, for example, a combination of nitroguanidine, phase-stabilized ammonium nitrate (NH4NO3) or other nonmetallic oxidizers, and a nitrogen-rich fuel other than azide (e.g. tetrazoles, triazoles, and their salts).

 

When a crash is sensed, the control unit sends an electrical signal to the inflator. The chemical reaction is initiated by the igniter, generating primarily nitrogen gas to fill the airbag causing it to deploy through the module cover. Due to rapid speed change of the vehicles involved in a crash, airbags must inflate rapidly to decrease the risk of occupant injuries by protecting them from hitting the vehicle interior. From the beginning of the crash, the entire deployment process is about 50 milliseconds - faster than the blink of an eye (about 200 milliseconds). Tiny holes in the bag allow the gas to disperse, absorbing the force of the impact on the occupant.


Multi Stage Inflators:


To reduce injury as a result of airbag inflation, advanced technology inflators have been developed with the capability to change the inflation pressure. This helps control the force of deployment based on the intensity of the crash, the size of the occupant, and their position in the vehicle. These inflators consist of two chambers with dual initiators. Thus, by firing either one or both of the initiators, the force of the inflation can be controlled.

  • Contact Supplier
Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA  
$10.50 10 Pieces(MOQ)

Seat Belt Tube Inflator in Car Safety Parts

Guangzhou Jashine Technology Co., Ltd.
$12.00 10 Pieces(MOQ)

Fits for Mazda OEM N066-66-Cso Haima Pulima Airbag Spiral Cable Clock Spring

Guangzhou Jashine Technology Co., Ltd.
$27.00 10 Pieces(MOQ)

Best Price and Quality Detonator for Auto Parts Airbag Gas Inflator

Guangzhou Jashine Technology Co., Ltd.
$12.00 5 Pieces(MOQ)

New Design Cars SRS Airbag Generator for Jasd-06 (with screw)

Guangzhou Jashine Technology Co., Ltd.
$34.60 10 Pieces(MOQ)

Engine Cover Insulator Cotton 53341-0K150 for Hilux Vigo

Guangzhou Lingyue Auto Parts Co., Ltd.
$140.00 5 Pieces(MOQ)

Wholesale Uni-V/Uni-T/Uni/K Front and Rear Bumpers

Huidong Zhonghe Automotive Technology (Changsha) Co., Ltd.
$2500.00 1 Piece(MOQ)

Baic Auto Spare Part Auto Accessory Car Spare Part Vehicle Part Manual Transmission Transmission Wave Box for Shenbao X25 New D50u5 Weiwang M50f

Xianghe Zhishen Trading Co., Ltd.
Negotiable 100 Pieces(MOQ)

Best Price Car Parts Clutch Kit for Nissans 30100-02t75 30100-6t300 30100-02t74

Ningbo Hongzhuo Import & Export Co., Ltd.
$10.00 200 Pieces(MOQ)

Aluminum Machinery Part Key Machine Part Die-Casting Part Aluminium Part

Ningbo V-King Metal Technology Co., Ltd.
$1.00 1 Piece(MOQ)

Foton Ollin Aumark JAC Yuejin Jmc DFAC Jbc Forland Shifeng Light Truck Spare Parts

Jinan SanGu Auto Parts Co., Ltd