ITEM | UNIT | JT-2518X |
Workbench | Workbench size | mm | 2700*1600 |
Worktable load-bearing capacity | kg | 6500 |
T-slot width (width x spacing x number of slots) | mm | 22*200*7 |
Trip | X-axis travel | mm | 2500 |
Y-axis travel | mm | 1800 |
Z-axis travel | mm | 800 |
Distance between two pillars | mm | 1800 |
Height from workbench to crossbeam | mm | 1250 |
Distance from spindle end face to workbench | mm | 180-980 |
Distance from spindle center to Z-axis rail surface | mm | 450 |
Principal axis | Speed range | rpm | 6000 |
Main spindle power (continuous/30 minute rated) | kw | 15/18.5 |
Spindle torque(rated for continuous/15minutes) | Nm | 143/236 |
Slope of spindle inner hole | | BT50 |
Transmission mode | | Belt-type |
Feed | X-axis rapid displacement | m/min | 12 |
Y-axis rapid displacement | m/min | 12 |
Z-axis rapid displacement | m/min | 12 |
Feed rate | mm/min | 8000 |
Automatic tool change system | Tool magazine capacity | set | 24 |
Maximum tool outer diameter (when fully loaded) | mm | 112 |
Expanding the diameter of the hollow blade | mm | 200 |
Maximum tool length | mm | 350 |
Maximum tool weight | kg | 18 |
Tool change time (knife to knife) | sec | 5 |
Precision VD13441 (JISB6338) | Positioning accuracy | mm | P0.025(±0.005/300) |
Repetitive accuracy | mm | Ps0.002(±0.003) |
Other | Electricity dernad | Kva | 50 |
Barometric pressure demand (minimum) | kg/cm² | 6 |
Cuting fluid capacity | liter | 400 |
Machine footprint | mm(approximately) | 6300*5100 |
Machine height | mm(approximately) | 4500 |
Machine weight | kg(approximately) | 23000 |