Audited Supplier
KP3004A-7T
Ion Snake Gun
KAPPER
Carton Box
184(L)*36(W)*185(H)mm
China
8414599099
Product Description
SECTION 1:DESCRIPTION***********************************************************
KP3004A-7T 3th generation ionizing air gun is a handheld device developed and produced by Kapper to eliminate static electricity and dust on the surface of objects. It can be used with compressed air and high-voltage power supply.
KP3004A-7T 3th generation ionizing air gun can generate a large amount of airflow with positive and negative charges, which is blown out by the compressed air at high speed, and can neutralize the charge on the object. When the surface of the object is negatively charged, it will attract the positive charge in the airflow. When the surface of the object is positively charged, it will attract the negative charge in the airflow, so that the static electricity on the surface of the object is neutralized and eliminated. The purpose of static electricity.
KP3004A-7T 3th generation ionizing air gun is widely used in plastic spraying, electronics, LED optoelectronics, printing, pharmaceutical and other industries.
SECTION 2:FEATURES***************************************************************
1.Neutralize static electricity quickly.
2.Ion air flow covers a large area.
3.Small size and portable operation.
4.Good dust removal effect.
5.The air gun has a good grounding protection function.
SECTION 3:SPECIFICATIONS********************************************************
SECTION 4:TEST RESULT**********************************************************
* The test result by ME268A comprehensive electrostatic tester shall prevail.
* Test according to IEC - 61340-5-1 A 6.
* Test data may change with the surrounding temperature and humidity.
Spraying paiting industry:
Since most coatings use various flammable solvents as diluents, the static electricity generated during spraying is very easy to ignite and detonate the gases of these solvents during discharge. Therefore, how to prevent electrostatic hazards in paint spraying is a problem that cannot be ignored. In order to prevent the hazard of static electricity in paint spraying, the spray gun should be equipped with a device to eliminate static electricity; spraying workers are best to wear anti-static work shoes with a resistance of 10 to the 5th power of 10 to the 8th power of 10, and absolutely not to wear insulated working shoes; When a thin plate must be laid on the ground or the back of the coated object to prevent the paint from flying, insulating materials such as plastic plates must not be used, but thin plates made of conductive materials should be used.
APPLICATION
About Kapper
KAPPER specializes in the production of ionnizing blowers, ionizing air guns, ionizing air bar, ionizing air snakes and other static elimination equipment manufacturers, and the pioneer of industrial static control. Since its inception in 2006, it has always been dedicated to industrial static electricity. Control: Professional R&D and manufacturing of ionizing air nozzles, ionizing fans, ionizing rods, ionizing snakes, ionizing air guns, electrostatic testers and other static elimination equipment and related products. It has provided high-quality industrial static control and advanced and unique technical solutions for many famous manufacturers across the worldwide. It is a comprehensive enterprise specializing in the research and development, production, sales and agency of dust-free purification products and anti-static products.
KP3004A-7T 3th generation ionizing air gun is a handheld device developed and produced by Kapper to eliminate static electricity and dust on the surface of objects. It can be used with compressed air and high-voltage power supply.
KP3004A-7T 3th generation ionizing air gun can generate a large amount of airflow with positive and negative charges, which is blown out by the compressed air at high speed, and can neutralize the charge on the object. When the surface of the object is negatively charged, it will attract the positive charge in the airflow. When the surface of the object is positively charged, it will attract the negative charge in the airflow, so that the static electricity on the surface of the object is neutralized and eliminated. The purpose of static electricity.
KP3004A-7T 3th generation ionizing air gun is widely used in plastic spraying, electronics, LED optoelectronics, printing, pharmaceutical and other industries.
SECTION 2:FEATURES***************************************************************
1.Neutralize static electricity quickly.
2.Ion air flow covers a large area.
3.Small size and portable operation.
4.Good dust removal effect.
5.The air gun has a good grounding protection function.
SECTION 3:SPECIFICATIONS********************************************************
| Operation coltage | AC 4.6KV |
| Working distance | 150-300mm |
| Air supply connector | Ф8mm(customized) |
| Ion balance | ≤|±35V|(distance 300mm) |
| Discharge time | ≤1S(distance 300mm) |
| Use medium | Clean compressed air |
| Working temperature | 0ºC-50ºC |
| Working humidity | <75% |
| Power cord length | 2.8M(customized) |
| Compressed air pressure | 0.3-0.8Mpa |
| Airflow velocity | 3-10m/S |
| Noise | ≤65dB |
| Ozone concentration | ≤ 0.03 ppm (distance 150mm) |
| Gross weight | 0.6kg(included 3M wire) |
| Power interface | KP4001A |
SECTION 4:TEST RESULT**********************************************************
| Testing condition | ||
| Humidity:≤60% Testing voltage:1KV-100V Temperature:22ºC | ||
| Distance | 300mm | |
| Decay time | Positive | 1.0s |
| Negative | 1.0s | |
| Offset voltage | ≤±35V | |
* The test result by ME268A comprehensive electrostatic tester shall prevail.
* Test according to IEC - 61340-5-1 A 6.
* Test data may change with the surrounding temperature and humidity.
Spraying paiting industry:
Since most coatings use various flammable solvents as diluents, the static electricity generated during spraying is very easy to ignite and detonate the gases of these solvents during discharge. Therefore, how to prevent electrostatic hazards in paint spraying is a problem that cannot be ignored. In order to prevent the hazard of static electricity in paint spraying, the spray gun should be equipped with a device to eliminate static electricity; spraying workers are best to wear anti-static work shoes with a resistance of 10 to the 5th power of 10 to the 8th power of 10, and absolutely not to wear insulated working shoes; When a thin plate must be laid on the ground or the back of the coated object to prevent the paint from flying, insulating materials such as plastic plates must not be used, but thin plates made of conductive materials should be used.
APPLICATION
About KapperKAPPER specializes in the production of ionnizing blowers, ionizing air guns, ionizing air bar, ionizing air snakes and other static elimination equipment manufacturers, and the pioneer of industrial static control. Since its inception in 2006, it has always been dedicated to industrial static electricity. Control: Professional R&D and manufacturing of ionizing air nozzles, ionizing fans, ionizing rods, ionizing snakes, ionizing air guns, electrostatic testers and other static elimination equipment and related products. It has provided high-quality industrial static control and advanced and unique technical solutions for many famous manufacturers across the worldwide. It is a comprehensive enterprise specializing in the research and development, production, sales and agency of dust-free purification products and anti-static products.
