Audited Supplier
HZ-QG-2
1 Year Warranty
1 Year
Beer Keg Washing Machine
Semi-Automatic
Beer
Single-Head
Multi-Room Feeding
Flow Meter
Pressure
Pneumatic Lifting
Linear
Keg
Metal
Hisent
Wooden Case
Shandong
8422200000
Product Description
Beer Keg Washing and Filling AIO Machine(table board lifting)
Main Technical Parameters
| Equipment Outer Dimensions | 1200*1600*2000mm |
| Net Weight | 380KG |
| Power | Steam Heating: 3KW Electric Heating: 18KW |
| Production Capacity | 30-40 kegs/H |
| Applicable Kegs | Keg with Diameter 250-500mm, Height 360-600mm |
| Tank Heating Way | Steam Heating or electric heating |
| Table Board | lifting |
| Power Supply Voltage | AC 380V 50HZ (customized) |
Main function and feature
1,Automatic control by PLC, all parameters can be adjusted through touch screen.
2,Cleaning and filling process can be finished in this machine at one time.
3,With unique pressure maintaining system,performance stable and reliable, beer loss minimum.
4,With CIP automatic cleaning system
5.Table board is lifting, and convenient to take kegs, labor-saving and time-saving.
Working process
Washing process (with 2 tanks ,steam heating)
cylinder pressing→ air blowing (draining residue) → water wash (drain)→ air blowing (drain) → caustic wash → air blowing (caustic recycle) → hot water wash→ air blowing (drain) →hot water wash (drain)→ air blowing (drain) →steam sterilization (drain)→CO2 replace steam (drain)→ water wash ( hot water recycle)→ Co2 blowing (hot water recycle)→CO2 pressurize
Filling process
Cylinder pressing →steam blow keg spear (drain)→drain→Co2 pressurize (evacuate)→fill (evacuate)→ hot water wash keg spear (drain) →Co2 blow (drain) →drain
washing station (with 3 tanks ,steam heating)
cylinder pressing→ air blowing (draining residue) → water wash→ air blowing (drain) → caustic wash → air blowing (caustic recycle) → hot water wash→ air blowing (drain) →water wash→ air blowing (drain) →sanitizer→ air blowing (recycle) →water wash→ air blowing (recycle)→steam sterilization→ water wash→ air blowing (recycle)→CO2 replace steam→CO2 pressurize
filling station:
Cylinder pressing →steam blow keg spear (drain)→drain→Co2 pressurize (evacuate)→fill (evacuate)→ hot water wash keg spear (drain) →Co2 blow (drain) →drain
Process of CIP
Connect the CIP liquid to the beer inlet→ connect the CIP outlet to the drainage or CIP recycling pipe→ install the blind flange to the filling station→ click "CIP" on touch screen →press "start" on the filling station →press "stop" when finish the CIP.
Note: After CIP process, please connect co2 to the beer inlet to blow out some residual CIP liquid inside of the beer pipe.
