Audited Supplier
Analyze graphs and trends directly on the DMM6500 touchscreen
Key Features • 15 measurement functions including capacitance, temperature, and digitizing • Expanded measurement ranges include 10 pA to 10 A and 1 µomto 100 Mom • Large 5-inch (12.7 cm) multi-touch capacitive touchscreen with graphical display • Large internal memory; store up to 7 million readings • Multiple language modes: SCPI, TSP® scripting, Keithley 2000 SCPI emulation, Keysight 34401A SCPI emulation • Two-year specifications allow for longer calibration cycles • Standard USB-TMC and LXI/Ethernet communication interfaces • Optional user-installable communication interfaces including: GPIB, TSP-Link®, and RS-232 • Capture voltage or current transients with 1 MS/sec digitizer • USB host port for storing readings, instrument configurations, and screen images • Three-year warranty
Key Features
• 15 measurement functions including capacitance, temperature, and digitizing
• Expanded measurement ranges include 10 pA to 10 A and 1 µom to 100 Mom • Large 5-inch (12.7 cm) multi-touch capacitive touchscreen with graphical display • Large internal memory; store up to 7 million readings
• Multiple language modes: SCPI, TSP® scripting, Keithley 2000 SCPI emulation, Keysight 34401A SCPI emulation • Two-year specifications allow for longer calibration cycles
• Standard USB-TMC and LXI/Ethernet communication interfaces
• Optional user-installable communication interfaces including: GPIB, TSP-Link®, and RS-232
• Capture voltage or current transients with 1 MS/sec digitizer
• USB host port for storing readings, instrument configurations, and screen images
• Three-year warranty
| Datasheet | Accessory | Description |
|---|---|---|
| View Datasheet | 1754 | SAFETY UNIVERSAL TEST LEAD KIT |
| View Datasheet | 2000-SCAN | SCANNER BOARD |
| View Datasheet | 2001-TCSCAN | THERMCPL/GEN PURPOSE SCAN CARD |
| View Datasheet | 5804 | 4 TERMINAL TEST LEAD SET |
| View Datasheet | 5805 | KELVIN PROBES, 0.9M (3FT) |
| View Datasheet | 5806 | KELVIN CLIP LEADS |
| View Datasheet | 5808 | LOW COST SINGLE PIN KELVIN PROBE SET |
| View Datasheet | 8501-1 | TRIGGER LINK CABLES W/DIN CON |
| View Datasheet | 8503. | 8-Pin DIN-TO-BNC TRIGGER CABLE |
| View Datasheet | CA-18-1 | CABLE, DUAL BANANA TO DUAL BANANA, 60 INCHES LONG |
| View Datasheet | KPCI-488LPA | LOW PROFILE IEEE-488 INTERFACE BOARD |
| View Datasheet | KTTI-GPIB | GPIB Communication and Digital I/O accessory, user-installable |
| View Datasheet | KTTI-RS232 | RS232 Communication and Digital I/O accessory, user-installable |
| View Datasheet | KTTI-TSP | TSP-Link Communication and Digital I/O accessory, user-installable |
| View Datasheet | KUSB-488B | IEEE-488.2 USB-TO-GPIB INTERFACE ADAPTER |
KickStart instrument PC software
KickStart can configure, test, and collect data from multiple instruments, including DMM, power supply, and SMU instruments
And Data logger. You can control up to 8 instruments simultaneously, retrieving millions of readings from each instrument.
This makes KickStart an excellent solution that can meet data recording needs, using analog-to-digital conversion
Change DMM to capture a large amount of data from transient events.
The ability to quickly gain insight is crucial, so KickStart will immediately draw a data graph and map a large number of viewing areas
Specially assigned to charts, while allowing you to view and edit the most important parameters in other instruments in the test setup.
Kickstart also includes a comparison tool that allows for drawing and overlaying data from each test run history.
