Audited Supplier
| Description | KELAI outdoor 3 square holes 3D wall panel lightweight concrete panel |
| Brand name | KELAI WPC |
| Size | 130X26 mm |
| Color | As the color card or custominzed as you like |
| Usage | Outdoor project |
| Design | Wall cladding |
| Materical | 1. 60% wood power |
| 2. 30% HDPE | |
| 3. 10% chemical additives(pigment, anti-UV agent, anti-oxidant, etc.) |
WPC is a new type of composite material that has been booming at home and abroad in recent years, it contains 60% wood fiber, 30% HDPE (high-density polyethylene material) and 10% filler, which is waterproof, insect-proof, recyclable, etc. Its durability is significantly higher than ordinary wood, and it saves wood resources well. WPC can be used for interior doors, closets, ceiling panels, decorative wall panels, outdoor flooring, guardrail posts, garden fences, fencing, leisure benches, planters, road signs, transportation pallets, etc.
Low maintenance and designed to last, our wood plastic composite products are designed to be a fit and forget solution, saving hours annually on traditional maintenance tasks. The KELAI composite wall cladding system requires very little maintenance with no painting, staining or sealing necessary, just a little soapy water will suffice for the occasional clean.
| 1. waterproof and moisture proof. solve the problem of wooden products are easy to rot and swell and deform after absorbing water and moisture in humid and watery environments. |
| 2. Insect and termite resistant. effectively eliminating insect harassment and extending service life. |
| 3. Colorful, with many colors to choose . Both with natural wood texture and wood texture, but also according to their own personality to customize the color needed. |
| 4. High environmental protection, recyclable. Products do not contain benzene substances, recyclable save the use of wood, suitable for sustainable development of national policy, for the benefit of society. |
| 5. Simple installation, convenient construction, save installation time and cost. |
| 6. No cracking, no maintenance. save the cost of repair and maintenance later. |
KELAI Brand Introduction:
As worldwide flooring brand. KELAI devotes itself to wood floor`s development and research. Seeking for professional and excellent quality control is our final mission. KELAI is a family-run business still managed by the same persons that founded it. The business was born with one key focus: to better serve customers through supplying high-performing flooring solutions at a competitive price. Years later and the business has grown from a few-men team,to a group of knowledgeable problem-solvers who are dedicated to fulfilling these same goals.
1. What is the main ingredient of your WPC?
It is made from 60% recycled wood fiber, 30% recycled HDPE and 10% additives, like pigment, anti-UV agent, anti-oxidant, etc.
2. What is wood species of wood fiber you use?
Eucalyptus, poplar and some mixed wood, which is color related.
3. What about the temperature range of your WPC can be used?
-40 to 60 degrees.
4. What about the warranty of your WPC?
15 years warranty. Letter of warranty can be sent.
5. Will your WPC have color fading?
To be honest, our WPC will have some color fading during the first 6 months after installation, but not obivious.
6. What about your main market?
Our focus is always oversea market. More than 90% of our products are for export, and our main market is Greece, Czech Republic, Italy, Germany, Spain, Austria, Swiss, Estonia, Norway, UK, Korea, Thailand, Indonesia, Vietnam, USA, Canada, Argentina, Australia, etc.
7. What is the advantage of solid decking compared to hollow decking?
Less easier to crack. Higher tensile strength. Less distortion with load-bearing. Lower water absorption rate. Joist span can be comparatively bigger.
8. What is the material of your co-extrusion WPC?
Shield layer (protection layer): engineered plastic. Core: wood plastic composite.
9. Can we say co-extrusion WPC is better than normal WPC?
We can not simply say which one is better. Different customers have different likes. For co-extrusion WPC, it will not have color fading problem, more anti-scratch, and more stain resistant.
10. What properties will you test for your raw material and end products? Wood fiber: ash content, fiber size, water content.
End product: strength test, boiling test and expansion rate test, temperature cycle test, outdoor UV test
11. How many production lines you have? What about the production capacity per month?
14 extrusions lines. 30-35 containers per month.
12. How many sqm. of decking can be loaded in 1x20GP container?
Appr. 800 sqm. of decking, plus joist and accessories.
13. What about delivery time for one container?
15-20 days upon deposit payment well received.
14.What kind of certification you have?
ISO9001, ISO14001, FSC certification. As for test report, there is test report done according to EN15534 standard and ASTM
standard.
15. Have you ever received any complaints from your customers?
Frankly speaking, yes. And it's mainly about color difference, cause our raw material is recycled material, there is always
difference between different lots. Now mixing is done for our HDPE plastic and also after pelletizing to well control of this
problem.
