Audited Supplier
NX1300D
Lithium-ion
CE, FCC
256 channels
5-9km
LCD Display
Basic Encryption
Encrypted Communication, Noise Suppression
IP54
KENWOOD
Paper Box
108*28*30MM
Japan
8517142000
Product Description
KENWOOD NX-1300 DMR Keypad TRANSCEIVERS UHF VHF Walkie Talkie Two Way Radio
| Feature | NX-1200 | NX-1300 |
|---|---|---|
| Frequency Ranges | 136-174 MHz | 450-520 MHz |
| 400-470 MHz | ||
| Max Channels per Radio | 260 (64 for no LCD) | 260 (64 for no LCD) |
| Number of Zones | 128 (4 for no LCD) | 128 (4 for no LCD) |
| Max Channels per Zone | 250 (16 for no LCD) | 250 (16 for no LCD) |
| Analog Channel Spacing | 30/11, 25/1, 15, 12.5 kHz | 30/11, 25/1, 15, 12.5 kHz |
| Digital Channel Spacing | 12.51, 6.25 kHz | 12.51, 6.25 kHz |
| Power Supply | 7.5 VDC +20% | 7.5 VDC +20% |
| Battery Life (5-5-90) | ||
| - KNB-45L/84L | 14.5 H | 11 H |
| - KNB-53N | 10 H | 7 H |
| - KNB-69L | 19 H | 14 H |
| Operating Temperature | -22°F to +140°F | -22°F to +140°F |
| Frequency Stability | +0.5 ppm | +0.5 ppm |
| Dimensions (Radio only) | 2.13 x 4.84 x 1.32 in | 2.13 x 4.84 x 1.32 in |
| Weight (Net) | 6.17 oz (175 g) | 10.41 oz (295 g) |
| 12.88 oz (365 g) | 10.93 oz (310 g) | |
| FCC ID (Pending) | K44501001 | K44501103 |
| K44501102 | ||
| IC Certification (Pending) | 282F-501001 | 282F-501102 |
| Receiver Sensitivity | ||
| - NXDN 6.25 kHz (3% BER) | 0.18 μV | 0.18 μV |
| - NXDN 12.5 kHz (3% BER) | 0.22 μV | 0.22 μV |
| - DMR 12.5 kHz (1% BER) | 0.25 μV | 0.25 μV |
| - DMR 12.5 kHz (5% BER) | 0.18 μV | 0.18 μV |
| - Analog 12.5/25 kHz (12 dB SINAD) | 0.24/0.20 μV | 0.24/0.20 μV |
| Selectivity | 74 dB | 74 dB |
| Intermodulation | 70 dB | 70 dB |
| Spurious Rejection | 70 dB | 70 dB |
| Audio Distortion | 7% | 7% |
| Audio Output (Internal) | 1W | 1W |
| Transmitter RF Power Output | 5/1/40/11 W | 5/1/40/11 W |
| Spurious Emission | -70 dB | -70 dB |
| FM Hum & Noise (Analog 12.5/25 kHz) | 40/45 dB | 40/45 dB |
| Audio Distortion | 2% | 2% |
| DMR Digital Protocol | ETSI TS 102 361-1,-2,-3 | ETSI TS 102 361-1,-2,-3 |
FAQ Q: Do battery need charge when you get at the first?
A: Upon delivery, battery is not fully charged. Recharge is needed. For Ni-Cd, the first charging should over night.
Q: Why sometimes your partner's voice is intermittent?
A: Please note that you are within normal communication range, If you want use radio in distance range, please change other antenna with a bigger output power.If still same problem, please send the radio back to your authorized dealer repair.
Q: Can't turn on talky and even it is switch on, it often shuts off automatically?
A: Please check the battery contacts on the walkie talkie. If it is broken or twisted, please return the radio to your authorized dealer for maintenance during warranty.
Q: Can't transmit or receiver signal with other members?
A: First, please verify that the channel frequency and the CTcss you are used the same as those of your group members. Please make sure that you and your partners are all within the radio coverage, If the channel frequency and the CTCSS are the same.
Q: Why sometimes received voice from other groups?
A: Two way solutions.You can change another channel or change another channel frequency by PC software.
Q: Which is better- VHF or UHF?
A: epends on the terrain. The UHF signal is attenuated or absorbed by foliage, rough terrain and trees, VHF does better outdoors. The VHF has difficulties penetrating steel and concrete, UHF does better in and around buildings. If you use the radios in both environments, we prefer using UHF band.
A: Upon delivery, battery is not fully charged. Recharge is needed. For Ni-Cd, the first charging should over night.
Q: Why sometimes your partner's voice is intermittent?
A: Please note that you are within normal communication range, If you want use radio in distance range, please change other antenna with a bigger output power.If still same problem, please send the radio back to your authorized dealer repair.
Q: Can't turn on talky and even it is switch on, it often shuts off automatically?
A: Please check the battery contacts on the walkie talkie. If it is broken or twisted, please return the radio to your authorized dealer for maintenance during warranty.
Q: Can't transmit or receiver signal with other members?
A: First, please verify that the channel frequency and the CTcss you are used the same as those of your group members. Please make sure that you and your partners are all within the radio coverage, If the channel frequency and the CTCSS are the same.
Q: Why sometimes received voice from other groups?
A: Two way solutions.You can change another channel or change another channel frequency by PC software.
Q: Which is better- VHF or UHF?
A: epends on the terrain. The UHF signal is attenuated or absorbed by foliage, rough terrain and trees, VHF does better outdoors. The VHF has difficulties penetrating steel and concrete, UHF does better in and around buildings. If you use the radios in both environments, we prefer using UHF band.
