Audited Supplier
| Specification of automatic steering motor | |
| Rated Voltage | DC12V/24V |
| Rated Power | 50W |
| Rated Current | 10A |
| Rated Speed | 100rpm |
| Instantaneous Max. Current | 20A |
| Working Mode | Speed mode; Positioin mode |
| Undervoltage Protection | 7V (Adjustable) |
| Overvoltage protection | 32V(Adjustable) |
| Control Methods | RS232/CAN |
| Feedback Part | Incremental encoder |
| Ambient Temp. | -25±55ºC |
| Storage Temp. | -35±65ºC |
| Protection Level | IP55 |
| Cooling Method | Natural Cooling |
| Weight | ≤5kg |
1 x autosteer motor,(3rd generation, for AGopengps, or your own brand, NOT for CEREA navigation system, if you use CEREA, please leave message in advance)
1 x steering wheel, diameter 41cm.
1 x prewired cable (1.5m long) with connector
1 x mounting brackets, it can matched most of tractor model.
1 x USB-RS232 cable to connect with keya configuration software.
1 x adapter, it connect the autopilot motor to the tractor steering shaft.
Notice: different tractor model has different spline sleeve, if you have several tractors, and you want test 1 sets motor kit for all of your tractors, let me know, I will help you.
When you need any help, you can contact us freely.
Autopilot motor Interface Definition
1 | IN+ | Power input+ |
2 | IN- | Power input - |
3 | TX | RS232-TX |
4 | RX | RS232-RX |
5 | GND | GROUND |
6 | CAN-H | CAN-H |
7 | CAN-L | CAN-L |
- Standard export carton with sponge
- Size : base on the order
- Weight : base on the order
- Detail data will be confirmed before shipping
| Pre-service | After Sales Service |
| Inquiry and Consult Support Sample testing Support View our Factory | Help instal and use the product 24 hours online problem solving |
