Knx 6 Inch Smart Touch Panel

Product Introduction
1.1 Product Appearance

1.2 Product Features
• 6   1.2-inch LCD, quad-array microphone noise cancellation, light, distance, temperature and humidity sensors, 2*1W speakers.
• Universal 6-type in-wall installation, easy installation, no need to modify the wall.
• KNX bus control, can control smart devices such as switches, lights,, air conditioners, fans, etc.
• Interconnection with smart home, customizable scene modes, quick switch scene modes by touching the panel or voice wake-upChapter Two Product Parameters and Key Dimensions
2.1 Parameter Specifications
Function Parameter Specifications
CPU PX30 Quad-core Cortex-A35
RAM 2, LPDDR4
ROM 8G, eMMC
Screen 6-inch 720P, 1.22-inch knob screen
 Android 11
Microphone Quad linear array
Speaker 8 ohm 1W*2, BOX sound chamber
Voice Recognition iFLYTEKBluetooth BT4.2
Sensors 50CM distance sensor, light sensor, temperature and humidity sensor
Buttons Knob, reset button
Interfaces Micro USBWired Network 100M network, supports PoE power supply (optional)
Wireless Network 2.4GHz, 802.1b/g/n
KNX Control Supported Scenes 20
 Supported Devices 52
 Types and Numbers of Devices Switch: 10, Dim: 8, Color Temperature: 8,
RGB: 6, Curtain: 8, Air Conditioner: 6, Underfloor Heating: , Fresh Air: 3
Operating Voltage 24V DC (24V-30V)
Operating Temperature 0ºC~40ºC
 Temperature -20ºC~60ºC
Operating Humidity ≤90% RH
Product Net Weight 50.6x85.6x10mm (excluding base) 205.6x85.6x53.6 (including base)

2.2 Key Dimensions

Chapter Three Interface Description
3.1 Interface Description

3.2 KNX Wiring Diagram
• Red and terminals are KNX bus interfaces, yellow and white terminals are auxiliary power supply interfaces.
• Black: KNX -, Red: KNX  ; White: G, Yellow: DC 24V input.
• The network port is a standard RJ45 port, supports POE power supply.

Chapter Four Installation Diagram Description
4.1 Installation Diagram

4.2 Installation Description
• Use a flathead screwdriver to remove the product bracket and base box, and install in the dark box.
• Check the wiring to ensure that the KNX cable and power cable are in good contact with the base box terminals and will not fall.
• Use the installation screws in the accessory package to secure the bracket base to the dark box, ensuring that the bracket is flush with the wall, then gently the panel to fit.
• Note that during the installation of the bracket, the installation screws should not be tightened too much to avoid deformation of the bracket or damage the screen and hardware.
• If there are any issues during installation, do not force the installation by pressing hard, but first level the wall and check the flat of the bracket.

Chapter Five Product Usage Description
5.1 Safety Precautions
• To ensure the correct use of this product, this product must be or removed by a professional electrician.
• The main power switch must be turned off before installing or removing this product to prevent electric shock.
• This product should kept away from fire and water sources during installation and use.
• This product cannot be used in a damp environment (such as a bathroom).
• The POE port and KNX auxiliary power interface cannot be powered at the same time.
5.2 Product KNX Configuration Usage Description*** To be