Audited Supplier
DAC28610042
24 Hours Online
12 Months Quality Gurrantee
Wheel Hub Bearing
Stainless Steel, Bearing Steel
P4, P5
ISO9001
C2, C3
with ABS, Without ABS
None
Toyota
Automotive
Angular Contact Ball Bearing
None
Available From Stock
Front Wheel
Michitop
Tray
28x61x42mm
Shandong Province of China
8482109000
Product Description
| Product Tape: | Double Row angular contact ball bearing | Application: | Automotive Bearing | Materials: | Bearing Steel |
| Standard Type: | Metric bearing | Size Standard: | Standard Bearing | Number of scrolling columns: | Double row bearing |
| Components separated: | Non-separable bearing | Self-aligning: | Not Self-aliging | Nominal outside diameter: | 61mm |
| Nominal inside diameter: | 28mm | Nominal Width: | 42mm | Item No.: | DAC28610042 |
| Weight: | 0.56kg | Position: | Front Wheel | Operational performance: | High Speed |
| Raceway type: | Deep ditch raceway | Sample or Stocking: | Available from stock | Cages and materials: | Ball bearing steels |
| Rolling element: | Ball | Customized Service: | Yes |
DAC28610042, Suitable for Toyota wheel hub bearing.
The bearing can withstand the combined axial and radial load when working. The bearing can be designed with a suitable contact Angle. Because the distance between the two centers of pressure is. Therefore, the bearing can fully withstand the impact torque of the car on the wheel when turning or other running.
Due to the bearing design has appropriate axial clearance. Therefore, there is no need to adjust the game (adjust the size of the gasket). The assembly of a single row of bearings requires clearance adjustment.
DAC series hub bearings are double row angular contact ball bearings consisting of one integral outer ring and two double half inner rings. There are two kinds of structures with and without sealing ring. No accessories such as spacers are required. The axial space can be minimized so that a short shaft with good rigidity can be used.
Our factory is located in Shandong which has been manufacturing bearings for many years and is focus on the processing and quality control. Every small piece of bearing we will check before packing to make sure the first hand quality. Also we have testing department to test every lot of bearings, to make sure the quality if satisfied by clients.
Our product advantages:
(1) Smooth edge, no burrs;
(2) Plenty of grease which is malactic and low noise;
(3) High bearing precision, high speed;
(4) Low loss, high carrying capacity;
(5) Mobile flexibility without delay;
...............................
Focus on the production of hub bearings, hub units and other products, complete specifications, non-standard customization...
Part of our items:................................................More items welcome call us to get quotation.
