Ks-U300 Ultrasonic Hardness Tester with Multi-Point Calibration

Product overview
There are many types of hardness testing methods,commonly used methods include HB, HRC, HV, HL, etc. But all these methods have boundness. The test force of HB and HRC is strong, so the indentation is big, and the damage to the surface is obvious. HV is tested by optical method, which needs very professional and technical personnel to operate, and cannot directly test large workpiece. And our ultrasonic hardness tester HST-U300 uses ultrasonic contact impedance method to compare and test patterns, this new method brings advantages of high precision, fast speed, portable, easy operation, etc.

Applications
Hardness test of flange edge and gear root stamping parts, mold, thin plate, face-hardened gear tooth, gear groove and taper part
Hardness test of axle and thin-wall pipes and vessels
Hardness test of wheels and turbine rotors
Hardness test of bit edge
Hardness test of welding parts
Measure the depth of deep hole with certain aperture, concave and convex mark with large radians, and irregular plane
Hardness test of most ferrous and nonferrous metals and their alloys in industrial production Etc.

Functional characteristics
New appearance design, innovative sculpt, convenient to hold and good craft.
3.5 inches large LCD screen with 320×480 color graphics dot matrix, beautiful font and graphics, rich information and clear display.
Full English display, menu-type operation, few keys, simple and convenient to operate.
For materials with different elastic modulus, only a simple point calibration is required to adapt to the new material.
Provide multi-point calibration function for any hardness standard. For materials without conversion table, users only need to prepare 2 to 10 test samples with different hardness to directly calibrate the hardness (Hardness standard is arbitrary, as long as these 2 to 10 samples have the same standard).
High accuracy -- ±3 %HV, ± 3%HB, ± 1.5HR (using test stand), according with the test error standard of GB/T-34205, JJF1436 and JB/T9377.
Tiny test indentation - smaller than a Leeb hardness tester and requires a high-power microscope to see.
High test speed -- output test results within 2S.
Easy to test on assembly line -- compare with Leeb hardness tester.
50 sets of data storage -- the data includes time information.
360° test without correction.

Technical Parameters: