Audited Supplier
KS311 is an electro-hydraulic top hammer longhole drill rig,engineered for production and long-hole drilling in underground mines,supplying fast and accurate straight hole drilling with guide device. This versatile top hammer longhole drill rig,mounted on frame-steered and diesel powered carriers and equipped with Montabert rock drills HC95LQW,HC110,HC112,HC150,or HC200, powerful & accurate drilling modules,sturdy longhole booms and FOPS/ROPS certified operator stations for maximum performance, safety, reliability and total drilling economy.The 360°feed rotation and wide swing/tilt angles make this top hammer longhole drill rig suitable for most mining methods and various drilling applications,like vertical and inclined plane rings and fans, as well as parallel long production holes and long single holes with a diameter of 64 to 102 millimeters (2 ½ to 4 inches) and a depth of up to 40 meters (131 feet),improving safety and lowering your operating costs.
Also this top hammer longhole drill rig offers a good performance-to-cost ratio for 4x4-meter to 5x5-meter or larger production drifts.
Quick facts
» 360-degree ring drilling with Parallel Holes Upwards/downwards up to 3066 mm apart,
» Hole diameter: 64-152 mm with Montabert HC95LQW,HC110,HC112,HC150 or HC200 Rock Drill/Drifter,
» Hole depth: rated up to 38 m, longer ones, like 44m optional,
» Engine power: 93kw/2200rpm Cummin QSB3.9-C125,
» Motor power:75-90 kw ABB.
Features
- Vertical and inclined plane rings and fans drilling,
- Also for parallel long production holes,
- As well as for long single holes,
- 360 rotation in full parallel coverage area and wide tilt angle ranges forward and backwards make the boom suitable to various drilling applications,
- Operator's safety,FOPS-approved protective roof,panel mounted under canopy,an ergonomic working environment.Cabin optional,
- Front and Rear Mounted Stingers For Stable Set Up For Drilling,
- Excel for hard rock drilling and in tough working conditions.
Technical Specifications( Against HC112 drifter)
| Hydraulic Drifter/Rock Drill | Control System | |||
| Type | HC112 | Anti-jamming control | Yes | |
| Percussion power | 26-30kW | Rotation control | Adjustable/Reversible | |
| Percussion pressure | Max. 210 bar | Flushing control | Water flow and pressure | |
| Percussion rate | Max. 46Hz | Percussion control | Adjustable power | |
| Rotation torque | Max. 1680Nm | Voltage | 24V | |
| Hole size | ∅76 mm | ∅89 -127 mm | Carrier | |
| Shank adapter | T45 M | T51 M,T60 M | Type of carrier | Frame-steered |
| Drill unit | Carrier articulation | ± 40° | ||
| Rod carousel capacity | 24 pcs | Rear axle oscillation | ± 10° | |
| Feed /Pull Force | 31 kN | Engine - Cummin | 93 kW,QSB3.9- C125 | |
| Feed extension | 1200 mm | Transmission Hydrodynamic | DT20000 | |
| Feed dump | +20 Degrees forward | Front / Rear Axles | DANA 123 / 112 | |
| Feed drilling | -65 Degrees backward | Tires | 12.00-20 | |
| Drill Rod | 4'-6' Rods | Service brakes | Hydraulic wet disc | |
| Hydraulic System | Parking and emergency brakes | SAHR fail safewet disc | ||
| Powerpack | 1 x 90 kW | Tramming speed | Max.16 km/h | |
| Oil tank filling pump | Electric | Gradeability / sideways tilt | Max. 15° / 5° | |
| Low oil level indication | Low oil level switch | Ground clearance | 320 mm | |
| Filtration | 20 µ/10 µ | Centralized greasing points | 10 ports | |
| Oil tank volume | 270 liters | Air And Water System | ||
| Cooler for hydraulic oil | Oil-to-water 1 x 45 kW | Flushing | By water | |
| Electric System | Water pump capacity | 375 l/min | ||
| Standard voltages | 380 - 690 V (± 10%), 50 or 60 Hz | Rock drill oil consumption | 180 - 250 g/h | |
| Total installed power | 119 kW | Rock drill air consumption | 300 l/min | |
| Batteries(Chargeable) | 2 x 12 V, 80 Ah | Air compressor | 1 m³/min (7 bar) | |
| Cable Reel | 80m-100m | Overall with rods 1525mm,others depending on options. | ||
| Cable reel lubrication | Manual | Weight | 22000 kg | |
| Cable reel mud clean | Manual | Transport / bolting length | 9669 mm / 8500 mm | |
| Front lights | 6 x 50W LED (4200 lm, 6000 K) | Tramming / bolting width | 2200 mm / 3300 mm | |
| Rear lights | 4 x 50W LED (4200 lm, 6000 K) | Tramming / drilling height | 3253 mm / 3591 mm | |
| Percussion hour meters | Optional | Turning width(T-section) | 3400 mm | |
| Operator remote control | Optional | Turning radius(Inner/Outter) | R2890 / R5440 mm | |
Tailor-made specifications,like cabin with air conditioner and joy sticks on seat sides, accepted.
Genuine machines, accepting any inspecting in famous factories, while lower prices, no profit on any customer or client.
Whole underground and / or surface mining machines against your specifications, could be supplied at one stop.
This top hammer long hole drill rig with Cab. and other machines listed below photos illustration,
Below machines , which could be matched with this production drill rig, also could be supplied,
For the ground materials handing, these machines could be supplied.
We will satisfy your need at one stop.Any more question, please feel free to contact us.
