Audited Supplier
LG, 3300UF/200V and 220UF/450V Aluminum Electrolytic Capacitor (Lug Terminal Type), 105ºC 2000hours
Feature
105ºC@ 2000hours , LUG terminal type.
High temperature, high ripple current resistance.
Suitable for machinery, filter circuit of tele-communication.
Rohs Compliance.
Specifications
| Items | Characteristics | ||||||
Capacitance Tolerance | ±20%(120Hz,20ºC) | ||||||
Operating Temperature Range | -40~+105ºC | -25~+105ºC | |||||
Rated Voltage Range | 16~250VDC | 315~450VDC | |||||
Leakage Current | 1≤3√CV or 5mA,which is greater.(After 5 minutes application of DC rated voltage,at 20ºC) | ||||||
Disspation Factor(tanδ) | Measurement Frequency:120Hz.Temperature:20ºC | ||||||
| Rated Voltage(V) | 16~25 | 35~50 | 63~315 | 350~450 | |||
| tan δ(Max) | 0.35 | 0.25 | 0.20 | 0.25 | |||
When nominal capacitance over 1000μF,tanδ shall be added 0.01 to the listed value with increase of every 1000μF. | |||||||
Low Temperature Stability Impedance Ratio(Max) | Measurement Frequency:120Hz. | ||||||
| Rated Voltage(V) | 16~100 | 160~250 | 315~450 | ||||
| Z(-25ºC)/Z(20ºC) | 6 | 4 | 8 | ||||
| Z(-25ºC)/Z(20ºC) | 12 | 8 | - | ||||
Load life | 2000hours,with application of rated voltage at 105ºC | ||||||
| Capacitance Change | Within±25% of lnitial Value | ||||||
| tan δ | 200% or less of lnitial Specified Value | ||||||
| Leakage Current | lnitial Specified Value or less | ||||||
Shelf Life | The following specification shall be satisfied when the capacitors are restored to 20ºC after exposing them for 1,000 hours 105ºC without voltage applied.Before the measurement ,the capacitor shall be preconditioned by applying voltage according to them 4.1 of JIS C5101-4. | ||||||
| Capacitance Change | Within±25% of lnitial Value | ||||||
| tan δ | 200% or less of lnitial Specified Value | ||||||
| Leakage Current | lnitial Specified Value or less | ||||||
| Standards | JIS C 5101-4(IEC 60384) | ||||||
Frequency coefficient of permissible ripple current
| Rated Voltage(V) | Frequency:(Hz) | |||
| 50 | 120 | 1K | ≥10K | |
| 16~100 | 0.90 | 1.00 | 1.20 | 1.25 |
| 160~315 | 0.95 | 1.00 | 1.20 | 1.25 |
| 350~450 | 0.98 | 1.00 | 1.15 | 1.20 |
Dimensions(mm) & Marking
