Audited Supplier
This insulation piercing connector is suitable for all types of LV ABC conductors
This connector has been designed for service connections in LV ABC lines.
Ease of installation has been combined with excellent mechanical, electrical, and environmental characteristics to provide a connector capable of terminating Aluminium or Copper stranded conductors.
Description
Aluminum alloy blades embedded in molded plastic and surrounded with a sealing compound ensure electrical contact in LV overhead distribution networks. A single torque control nut draws the two parts of the connector together and shears off when the teeth have pierced the insulation and made contact with the conductor strands.
Performances
This connector is fully in line with the French standard NFC 33 020 and the new European standard EN 50483 (connector class1):
- Mechanical tests on the connector
- Mechanical test on cables
- Voltage test underwater (6 kV for 1 min)
- Electrical aging test
- Environmental test (climatic and corrosion)
Features and Benefits
- Range taking - Equipped with shear head to ensure a reliable tightening torque
- Accepts copper conductor - Operating temperature -55°C to +55°C
- Waterproof - Installation temperature -20°C to +55°C
- Captive end flexible end caps - Can be installed on energized main if the tap is not under load
- All the components are un-losable It is not recommended to re-use IPC when removing
| Item No. | Main wire section | Branch wire section | Bolt |
| IPC 3.1 | 16-95mm2 | 10-25mm2 | 1 |
| IPC 3.2 | 70-95mm2 | 70-95mm2 | 1 |
| IPC 3.3 | 120-185mm2 | 16-25mm2 | 1 |
| IPC3.4 | 70-185mm2 | 70-185mm2 | 2 |
1. What certificate does your company have?
Our company has international certificates below:
A. Quality management system certificate complies with GB/T 19001-2016/ISO 9001: 2015 requirements;
B. Environmental management system certificate complies with GB/T 24001-2016/ISO 14001: 2015 requirements;
C. Occupational health and safety management system certificate complies with ISO 45001: 2018 requirements.
2. Is your company a factory or a trader? What products can be provided?
We are a company of manufacturer of Fiber optical cable fitting, ADSS OPGW Tension & suspension set, Preformed dead end guy grip, FTTH accessories, Overhead transmission line fitting, Pole line hardware, Electrical HDG steel cross arm, Stay rod assembly, Bolts nuts, washers, and Electric power fitting.
3. What are the materials of your products? Can do other materials?
For our preformed guy grip, dead-end products are mostly made of galvanized steel wire or alloy-clad steel wire, and aluminum alloy wire for armor rods. Sometimes, customers want copper-preformed materials, we indeed made it before.
However, we still listen to customers if different materials are required.
4. Can your company provide drawings?
Yes, we can. Drawings are a way of confirming the parameters of the products. By providing drawings, we can avoid mistakes. Sometimes, customers sent some pictures with measuring, we engineer can draw a very good technical drawing based on it.
5. Can you provide a Certificate of Origin? Or invoices certified by Embassies?
We have been already recorded and registered in the Commodity Inspection and Quarantine Bureau and the Embassy, so we are qualified to issue certificates of origin and invoices for different countries.
6. When customers show the target price or price from other suppliers, can you agree that?
We are happy when clients give us their advice about the buying price, that means, customers have interested to our company and products, and may in some way, also have trust in us. In this way, it's no doubt to carefully check the target price from customers, and listen to their requirements of quality. Give the best solutions.
