Audited Supplier
GN-CP20
1 to 3 Years
1 Year
Max. 20mm
CE,ISO9001
107*157*326
None
All Lithium Battery Separator and Electrode Can Be
About 6kg
0.01~0.5mm
Provided
Long Service Life
Energy & Mining
Ordinary Product
L140mm X W80mm
≥300kg
Rust-Proof Aluminum Alloy
Provided
Gelon
Standard Exported Package
coin cell punching machine
Guangdong, China
Product Description
Lab Battery equipment 10/12/14/15/16/19/20mm manual button battery coin cell punching machine
Product Description
The pneumatic punching machine is researched and designed by our company which is used for cutting various materials(thin metal
foil,electrode,separator,etc) in the battery industry. The equipment has fine workmanship, and the resulting discs has no burrs
and no indentation after punching, the cutting die can be replaced to achieve different sizes needs.The punch die match to die: first to mount punch die, make the flat of upper punch aim to screw holes . Shaking the rocker to lower the upper punch to the lower die plate, to ensure the upper punch face and the spindle closely after fastening screw . Then match the die, hand shake rocker to lower upper punch, and gently into the lower die, to move the upper punch in the lower die gently, and balanced the both screw locking slowly until fastening screws. Test, gently shake rocker to move the upper punch into the lower die without questions is the right way, if not, please match the die again. Finally put on elastic unloading (during the match die process, please do not punch hard, in order to avoid edge damage.
foil,electrode,separator,etc) in the battery industry. The equipment has fine workmanship, and the resulting discs has no burrs
and no indentation after punching, the cutting die can be replaced to achieve different sizes needs.The punch die match to die: first to mount punch die, make the flat of upper punch aim to screw holes . Shaking the rocker to lower the upper punch to the lower die plate, to ensure the upper punch face and the spindle closely after fastening screw . Then match the die, hand shake rocker to lower upper punch, and gently into the lower die, to move the upper punch in the lower die gently, and balanced the both screw locking slowly until fastening screws. Test, gently shake rocker to move the upper punch into the lower die without questions is the right way, if not, please match the die again. Finally put on elastic unloading (during the match die process, please do not punch hard, in order to avoid edge damage.
Optional die size | Φ3~24mm |
Standard die size | Φ12mm and Φ16mm |
