Audited Supplier
EPFT-20
a Lifetime
1 Year
Profile Extruder
PE
Extrusion Molding Machine
Multiple Feed
Separate Type Extruder
Twin-Screw
Intermeshing
Non Deep Screw
Exhaust
Automatic
Computerized
20mm
40/1
Many
Many
3.5 mm
Electrical Heating/4 Zones
Air Compression
Hapro
Plywood
China
9024800000
Product Description
Parallel twin screw extrusion unit (co-rotating), widely used in rubber and engineering resin blends, dispersion, modification, enhancement, chlorinated polypropylene and high water absorbing resin devolatilization, Biodegradable master batch,polycondensation of polyamide, polyurethane addition polymerization reaction extrusion; carbon powder, magnetic powder pelletizing; cable insulation material, sheath material,low smoke and low halogen flame retardant PVC cable and all kinds of silane cross-linking material preparation, etc. Dedicated to the extrusion forming process, for example the pelletizing experiment.
Drive device
It is mainly used to complete the plastic plasticizing and transportation by uniform rotation for torque setting, Servo motor control screw torque, pre-set torque from touch-screen.
Feeding device
Barrel contains materials and screw. The twin-screw is the heart of the extruder, divided into the charging section (solid conveying zone), compression section(melting zone) and the homogenization section (the melt conveying zone) three parts. Put the material into the hopper ,under the action of a rotating screw, material was pushed on to direction of the nose. Material endures strong shear, mixing and calendaring in the barrel, In this process, Meanwhile, the physical states of material the evolve from glass state to the high elastic state ,eventually become sticky flow pattern .Because of its rotation, the powder or particle shape plastic was pushed to the former, so as to achieve compaction, melting and mixing purpose of homogenization,
- Parallel Twin-screw platform is consist of the Drive device, Feeding device, Barrel ,Twin-screw and Dies parts, etc. The Twin-screw is the heart of the extruder, divided into the charging section (solid conveying zone), compression section(melting zone) and the homogenization section (the melt conveying zone) three parts. Put the material into the hopper ,under the action of a rotating screw, material was pushed on to direction of the nose. Material endures strong shear, mixing and calendaring in the barrel, In this process, Meanwhile, the physical states of material the evolve from glass state to the high elastic state ,eventually become sticky flow pattern .
- Equipment composition
Drive device
It is mainly used to complete the plastic plasticizing and transportation by uniform rotation for torque setting, Servo motor control screw torque, pre-set torque from touch-screen.
Feeding device
Barrel and Screw
Barrel contains materials and screw. The twin-screw is the heart of the extruder, divided into the charging section (solid conveying zone), compression section(melting zone) and the homogenization section (the melt conveying zone) three parts. Put the material into the hopper ,under the action of a rotating screw, material was pushed on to direction of the nose. Material endures strong shear, mixing and calendaring in the barrel, In this process, Meanwhile, the physical states of material the evolve from glass state to the high elastic state ,eventually become sticky flow pattern .Because of its rotation, the powder or particle shape plastic was pushed to the former, so as to achieve compaction, melting and mixing purpose of homogenization,
Dies
Mounting and interchanging of the die heads at the extruder is very easy: just fix them with the ring nut at the extruder barrel. The die heads are made of extremely corrosion-resistant steel and are heated electrically in the standard version ,and can be disassembled for cleaning. Various die heads are available for specific measuring tasks.For example ,It is mainly used in extruding and forming plate, sheet, film, profile, and granulator etc. - Technical Parameters:
| Photograph | Performance Index | Performance Parameter |
| Screw Diameter | 20 mm | |
| Deep of Screw Slot | 3.5 mm | |
| Screw L:D | 40:1 | |
| Screw material | Available | |
| Temp control system | RKC from Japan | |
| Temp sensor | J type thermocouple | |
| Heating | Electrical Heating/8 Zones | |
| Heating power | 6.4 kW | |
| Max. Temperature | 350ºC | |
| Max. speed of screw | 480 r/min | |
| Cooling | Air Compression | |
| Exhaust | Vacuum | |
| Pressure range | 0~100 Mpa (30Mpa available) | |
| Feeding speed | Manual adjustment | |
| Feeding | Screw metering feed | |
| Output | 1 -15 kg/ hr | |
| Die heads (Select one from three) | Flat Die (L×W:60×1.5mm, 0.8 kW) | |
| Film casting Die (150×1 mm,1.8 kW ) | ||
| Granulating Die (Ф3×2, 0.4kW) | ||
| Weight | 200 kg | |
| Dimension (L×W×H) | 2000×500×1550 mm |
