Audited Supplier
BP-8176-A
Lifetime Maintenance
1 Year
Pipe,Sheet,Profile,Filament,Piston,etc.
PVC,PE, PP,ABS,WPC,Polystyrene,EPE,XPS,etc.
Extrusion
One Feed
Integral Type Extruder
Single-Screw
Full Intermeshing
Deep Screw
Exhaust
Automatic
Computerized
BAOPIN
Polywood Wooden Case
1250*500*940(W*D*H)mm
China
8479899990
Product Description
Laboratory small single screw extruder
The small single screw extruder can be used for mixing and extrusion of engineering plastics, modified plastics and masterbatch. It is especially suitable for the teaching and research and development, small-scale production of small pipes, sections, film or sheet.
The equipment control small single screw extruder is equipped with high-precision LED digital display. It can be used in laboratory tests, quality control, teaching research, new product research and development, etc.
Parameters:
Specification:
1. Electric control system: PID/LED/RKC intelligent digital display temperature controller, precision smart digital instrument control and display of all process parameters, including temperature control, drive, pressure, joint control interlock function.
2. Heating zone: Mica heater in 3 areas of charging barrel, heater in 2 areas of handpiece. Each areas has a chopper cooling fin covered with security wind shield.
3. Cooling device: Three groups of multi-wing fans to cool air quietly and strongly.
4. Driving motor: Precision gear reduction motor
Features
The small single screw extruder can be used for mixing and extrusion of engineering plastics, modified plastics and masterbatch. It is especially suitable for the teaching and research and development, small-scale production of small pipes, sections, film or sheet.
The equipment control small single screw extruder is equipped with high-precision LED digital display. It can be used in laboratory tests, quality control, teaching research, new product research and development, etc.
Parameters:
| Screw diameter | 16, 20, 25, 30 ( optional ) |
| Rotation speed | 0-95 rpm frequency control |
| Length ratio | 1:25, other length ratios ( 10 to 30 times ) are optional |
| Power supply | 3 ∮ , 50HZ, 5 line |
Specification:
1. Electric control system: PID/LED/RKC intelligent digital display temperature controller, precision smart digital instrument control and display of all process parameters, including temperature control, drive, pressure, joint control interlock function.
2. Heating zone: Mica heater in 3 areas of charging barrel, heater in 2 areas of handpiece. Each areas has a chopper cooling fin covered with security wind shield.
3. Cooling device: Three groups of multi-wing fans to cool air quietly and strongly.
4. Driving motor: Precision gear reduction motor
Features
- Screw diameter are 20, 25, 30 (optional). Length ratio is 10 to 30 times are optional. So it expands the scope of various materials processing.
- Screw and barrel are made of 38CrMoAl chromium-molybdenum steel. With the surface-layer processing of tempering, nitriding, chroming and super-precision grinding. So they are hard and wear-resistant, highly corrosion resistant.
- Screw with a feeding zone, transportation segment, compression zone and the mixing head. It can process a variety of different materials to achieve the best dispersion effect.
- 0-80rpm screw speed stepless frequency control in order to meet the requirements of different materials extrusion process.
- Barrel heating using electric coil heater, easy maintenance, easy to install, 5-zone heating can be sure the temperature reaches required. Barrel adopts 3 multi-wing groups statically forced cooling fan, electric heating and wind cooling integrated layout, hedge balance of hot and cold to ensure effective constant temperature.
- Die with fast connection clasp, quick disassembly head, easy connection to downstream equipment and test conversion quickly.
- Options for diversion plate and the filter mask to prevent unmelted particles and impurities and increase the melt pressure as to ensure the quality of plasticizing.
